A set of 4 sets of 6 rollers of 16x13mm. They are of different colors to be able to recognize them quickly. There are 1 sets of 4gr, one of 4.5gr, one of 5.0gr and one of 5.5gr. You can of course mix by 3 these different weights which gives these possibilities: 6 x 4gr = 24gr 3 x 4gr + 3 x 4.5gr = 25.5gr 6 x 4.5gr or 3 x 4gr + 3 x 5 gr = 27gr 3 x 4.5gr...

variator roll / load  set 15 x 12 for standard Minarelli and CPI, generic, Neco, Keeway  variator, 22 different weight

Variator rol set 4x 6 rolls 15x12mm 4g / 4.5g / 5g / 5.5g

Variator Motorkit racing for a better progresivity and acceleration. Fits all scooter with Minarelli engine.

Half Pulley / vario fan Nitro, Aerox, Booster, Bw's, Ovetto, Neos, Jog, Mach G, Sr - Standard -  and all Minarelli engine

Stars for half pulley for scooter Minarelli 13mm    

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  Red, + 40%

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  Yellow, + 35% Ø53,5x115mm Øwire 3,7mm

17 x 25 x 18mm rear variator needle cage for motor scooters: Minarelli 2S 50 cc Piaggio 2S 50 cc Kymco 2S 50 cc Peugeot 2S in 4S 50 cc Sym 2S in 4S 50 cc

Variator Polini Hi-Speed for  Booster / BW'S / Nitro /Aerox / Jog / Stunt / Slider

Torsion controller Maloss for Nitro, Aerox, Booster, Bws, Stunt, Ovetto, Slider, Neos, Jog, Mach G, CPi, Keeway, Generic, Neco

Hi Speed variator Pack Drive Polini for all scooter with Minarelli engine . with 1belt,  different roll set and 2 pression springs

washers set (30pcs) for Minarelli variator. To ajust the height of the belt. 13 x 18.5 mm 13x18,5x0,6mm 13x18,5x0,8mm 13x18,5x0,35mm 13x18,5x1,0mm

Fixed pulley / half pulley for racing variator - in Teflon treated aluminium - inner diameter: 13mm. for all 50cc - 2 stroke scooters equipped with the Minarelli vertical or horizontal engine: Aprilia Amico 2t (1992-1998) Aprilia Amico 50 AIR 2T '96-'98 Aprilia Amico GL 50 AIR 2T '94-'95 Aprilia Amico LX-...

Variator tabs Nitro - Booster - Aerox - Bw - Stunt - Ovetto - Jog for original angle disk

 3 Malossi Vario  tabs for Multivar variateur. Fits also MHR 2000, Polini Speedcontrol, Bidalot and Motorkit varios

Variator Conic washer Nitro, Aerox, Booster, BW, Ovetto, Stunt, Neos, Slider, Jog, Mach G, aprilia SR and all Minarelli motors

Vario Malossi Nitro, Booster, Aerox, Bws, Ovetto, Stunt, Neos, Slider, Mach G, Aprilia SR  and all scooters with Minarelli engine, Multivar

Drain plug for scooters with  Minarelli  engine : Nitro - Aerox - Booster - ovetto - stunt - slider - Aprilia SR ....

Polini rear pulley variofan for all scooters 50 cc - 100 / 125 cc. Between pulley and spring

High gear set Doppler for Nitro 13/43 14T complete

Set of 2 Washers for Minarelli Over Range pulley Malossi

Polini variator bush - axle for Nitro Aerox Booster Bw's Ovetto Neos Stunt Aprilia SR and all scooter with  Minarelli engine 20 x 13 x 38 mm

Vario Polini  racing Evolution R02 for all Minarelli engine. supplied with 19x15.5mm roll set

3 Malossi Variator tabs for MHR TEAM

Transmission gear Malossi  Booster, Nitro, Bws, Aerox, Stunt, Slider, Ovetto, Jog, Mach G, Neos Xtra long : 16/40

Vario MRH TEAM version 2006 with large rollers (diameter 19mm). The electric starter must be absolutely removed. For any Minarelli motor scooter with racing configuration.

Variator kit Malossi Over Range MHR TEAM for Minarelli engines : variator + special belt + rear pulley complete

fixed pulley Variator  - vario fanfor minarelli scooter engine.

Rear pulley shaft and primary gear ratio very close to the origin (15 - 50) for gear box MBK Nitro, Booster, Stunt, Mcah G, Ovetto - Yamaha Aerox, Bw's, Slider, Neos, Jog - Aprilia SR WWW, Stealth,...

Malossi Mutivar vario bushing - axle for all 50cc 2 stroke scooter with Minarelli engine . Dimension 20 x 13 x 43.2 mm

Rear transmission vent hose for Nitro, Aerox, Beta Ark, Booster, Bw's, Ovetto, Neos, Stunt, Slider, Aprilia SR and any 50cc 2-stroke scooter with a vertical or horizontal Minarelli engine. Original part.

Star for MHR-Team variator. Also for over-range pack.

Variateur Racing Top performance Minarelli

Torque driver Nitro, Aerox, Booster, Stunt, Ovetto, Mach G, Neos Top performance with + 8% spring

Racing Rear pulley complete Malossi, for all scooter with Minarelli engine, to be used exclusively with Over-range belt. Allows you to gain speed without losing at startup

Rear wheel axle  Nitro, Booster, Ovetto, Aerox, Stunt, Neos, Bws, Mach G, Aprilia SR and all scooters with Minarelli engine 

Transmission gear Malossi  Booster, Nitro, Bws, Aerox, Stunt, Slider, Ovetto, Jog, Mach G, Neos  long : 13/44

Malossi MHR-Team 2000 aluminum variator for MBK Nitro Booster Mach G - Yamaha Aerox Bw's Jog - Aprilia SR - Beta Ark and any 50cc scooter with Minarelli engine. Mounts directly on the standard crankshaft (we recommend a reinforced one). Includes: Variator, ramp, guides, axis, fixed pulley, K4.7 thrust spring and 2 sets of rollers diameter 19mm (3.5 and 3.8...

CNC Red anodised TPR Factory gearbox cover for all scooters with a Minarelli horizontal (Nitro, Aerox, SR, Ovetto, Neos, Beta Ark...) or vertical (Booster, BWS, Stunt, Slider....) engine. With its racing look, this gearbox housing is a real plus that will allow you to optimise the performance of your engine. Indeed, thanks to the addition of bearings, friction is minimized and thus...

Variator Malossi Multivar MHR2006 Nitro Aerox Booster Bw's Stunt Slider Mach-G Jog Ovetto Neos Beta Ark Aprilia SR and any scooter 2 stroke 50cc with Minarelli engine.   Supplied with...

Polini evo rear squeeze spring Nitro, Aerox, Booster, Bws, Ovetto, Stunt, CPI, Neos, Jog, Mach G and all scooter with minarelli engines