Standard carburetor - 12 mm with automatic choke (double round connector) for Piaggio - Gilera Typhoon Zip Runner Stalker NRG NTT Sfera Fly Liberty 50 cc, 2 stroke. Adjustment screw, right side.

21 mm carburettor, copy of Dellorto PHBG black edition. Flexible mounting with connection for vacuum and oil pump - idle and richness settings on the right side. Racing type, the bushel cover is screwed on and the bowl is provided with a plug for easy main jet change. Main jet type : 5mm It is delivered with a 38 mm air filter adapter.

Set of 2 Polini carbon reed valves  for Piaggio/Gilera. Available in 0.30 mm (blue) or 0.35 mm (green).

19 mm carburettor, copy of Dellorto PHBG black edition. Flexible mounting with connection for vacuum and oil pump - idle and richness settings on the right side. Racing type, the bushel cover is screwed on and the bowl is provided with a plug for easy main jet change. Main jet type : 5mm It is delivered with a 38 mm air filter adapter.

Carburator YSN 12mm choke manual

Gasket for reedvalve Piaggio 2 stroke

Carburettor YSN 17.5 with automatic choke, delivered with the complete automatic starter with the cover and the electrical connection. Intended for flexible...

Carbu 21 mm Dellorto PHBG copy - flexible assembly with connection for vacuum and oil pump. Thanks to its bush cover and fuel tank plug to be screw, the maintenance and adjustments of this carburettor are facilitated. It is supplied with a 35 mm air filter adapter and...

Inlet - reed valve gasket for Peugeot scooter with horizontal 2 stroke engine Also suitable for Piaggio - Gilera 50cc - 2 stroke

Electric starter for scooters with Dellorto PHVA / PHBN carburators. 2 wires, 2 female plugs connection

Carburator 17.5mm, fit direct on inletpipe.

Carburator Polini CP 17.5 mm with cable choke. Male dimensions : - Inlet outer diameter : 25mm - air filter diameter : 46mm

Carburator Nitro, Booster, Aerox, Ludix, Speefight 3, CPI, Keeway, Generic standard. Supplied with electric / automatic starter / choke. Fits  most scooters with rubber manifold. main jet 82

Carburator 17.5mm with electrical starter for Nitro/Aerox, fit direct on inletpipe.

Carburator Polini PWK 34mm with hand starter

Carbu 17.5 mm black, copy of Dellorto carburetor PHBG flexible assembly with connection for vacuum and oil pump. Racing type, the bushel cover is screwed and the tank is provided with a cap allowing easy change of main jet. It comes with an adapter for air filter 38 mm. ...

Racing reed valve with fiber slats for Typhoon, Zip, Runner, NRG, NTT, Stalker and any 50cc 2-stroke scooter with Piaggio - Gilera engine <div class="tlid-result-transliteration-container...

Carburator Polini PWK 30mm with hand starter

Carburator Polini CP 19mm

Carburator Polini CP 23mm

Carburetor Polini CP Evolution 19mm male (carburetor enter the manifold), ext. diam.  29mm , filter fixing 46mm or  61mm with Polini funnel included in the pack.

Malossi angled Racing reed valve, 2 carbon petals for Gilera - Piaggio VL16 with open crank case

Carburator Polini CP EVO 21mm for : manifold diameter 25 mm, air filtrer  diameter 46 mm

Racing Reed valve TPR /  V-Force3 Piaggio / Gilera - 8 petals by Top Performance

Carburator Polini PWK 32mm with hand choke

Carburator Polini CP 24mm Spraying slowed down : 40 Main sprinkler : 112

Carburator Polini CP 21mm for cable starter. for : manifold diameter 25 mm, air filtrer  diameter 46 mm

Malossi MHR VL13 Reed Valve CARB.EP0,30 (45°) for Gilera - Piaggio 50cc 2 stroke

Racing carburator for Derbi in 19mm.

Polini carburettor CP19 with choke for cable - 90 ° throttle and starter cable entries and adptor for original air filter. For scooter 50 (Nitro Aerox Booster Bw Piaggio Ludix Speedfight 3 ...) with oil and vacuum tips ( + plugs when not in use). Dimensions: <br...

Carburator Polini PWK 28mm with hand choke