Mainjet for carburator Dellorto  PHBG available in  : 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110, 115, 120, 125, 130, 150.

Idle jet for carburator Dellorto PHBG, from 0.38 to 0.50

Main jet kit 5mm for dellortho PHBG. different possibilities : - from 70 to 92 - from 88 to 110

Hollow screw used to adjust the tension of the gas cable. Is positioned on the bush slider cover. For Dellorto carburetors and replicas. <div...

10 stationay jet set for Dellorto PHBG carburator : from 0.30 to 0.50 mm

Adapter ring to screw on Dellorto PHBG carburettors from 15 to 21 mm with M32 thread. Allows to place a Ø35mm air filter.

needle clips for Dellorto PHBG en copy carburetors

Set of 2 90 ° pipes for guide and adjustment of throttle and choke cables for Dellorto carburetor - Keihin PWK and PE. <div class="tlid-result-transliteration-container result-transliteration-container...

Electric starter for scooters with Dellorto / Gurtner / Keihin carburators. 2 wires, rectangular connection

Adapter nylon Dellorto PHBG, in : 24mm, out : 26mm. Between carburator and manifold

Float needle for carburetor PHBG - SHA - PHVA - PHBN. triangular holding cap not spring mounted.

Float chamber gasket for Dellorto PHBG carburetor

reparation set for PHBG

Gasket with screw for PHBG carburator

Needle for carburetor Dellorto PHBG cone type W7  

Float Needle for carburetor PHBG - SHA - PHVA . triangular holding cap not spring mounted. Genuine Dellorto part

carburetor float axle for Dellorto PHBG - PHVA - PHBN diam 2 mm, lenght 27 mm

gaz valve repair kit for Dellorto PHBG from 17 to 21 mm

Gaz top kit  for carburator Dellorto PHBG

Piston return spring for Dellorto PHBG carburetor from 17 to 21mm cable choke. Original part

Needle for carburetor Dellorto PHBG cone type W16

Air adjusting spring for  Dellorto PHBG carburetor

Jet Needle set dellorto PHBG set of 10

Starter/choke grip for PHBG

Float Needle for carburetor PHBG - SHA - PHVA - PHBN. round. Holding cap with inside spring mounted. Genuine Dellorto part

Anti-emulsion washer for Dellorto carburetor PHBG - between the needle housing and the main jet

Carburetor needle Dellorto PHBG cone W9

nylon adapter ring Dellorto PHBG

idle adjustement screw for carburateur Dellorto PHBG  from 17.5 to 21 mm. genuine parts

Air adjusting screw for all  Dellorto PHBG carburetor

Fitting clamp for carburetor dellorto PHBG  female 17.5 - 19 - 21 mm. Genuine part

Rubber elbow carburetor

Air filter adaptator for PHBG carburator Ø60mm?

Float for Dellorto PHBG carburetor

Dellorto PHBG carburettor slider cover, screw on (late models). Original part

Set of 2 short elbows / guides for gas and choke cable for PHBG and SHA carburetor. Supplied with 1 sealing rubber and 1 cable adjuster. <span...

TNT Transparent fuel tank for Dellorto PHBG carburettor. Alternative part delivered with gasket and fixing screws. <div...

Needle well for PHBG carburetor AU262

Fuel slider spring for Dellorto PHBG carburetor and copy from 17.5 to 21

idle screw and spring Dellorto PHBG - PHVA - PHBN

carburator tank for Dellorto PHBG standard, black

Transparent fuel tank for Dellorto PHBG carburetor. Original part.