Top engine gasket set for Bidalot Factory RF-WR for Derbi Euro 2.
Consists of 4 cylinder base gaskets of different thickness (0.10 - 0.20 - 0.30 and 0.50 mm) and all O-rings.
Top engine gasket set for Bidalot Factory RF-WR for Derbi Euro 2.
Consists of 4 cylinder base gaskets of different thickness (0.10 - 0.20 - 0.30 and 0.50 mm) and all O-rings.
Top engine gasket set for Bidalot Factory RF-WR for Derbi Euro 3. Consists of 4 cylinder base gaskets of different thickness (0.10 - 0.20 - 0.30 and 0.50 mm) and all O-rings.
Top engine gasket set for Bidalot Factory RF-WR for Derbi Euro 3. Consists of 4 cylinder base gaskets of different thickness (0.10 - 0.20 - 0.30 and 0.50 mm) and all O-rings.
Bidalot complete cast iron piston RF50WR 39.94 mm racing replica, height 22 mm, centered ring pin, chromed steel ring 40 x 1 mm. For Derbi Euro 2/3 and G1 G2 G3 and Open engine.
Bidalot complete cast iron piston RF50WR 39.94 mm racing replica, height 22 mm, centered ring pin, chromed steel ring 40 x 1 mm. For Derbi Euro 2/3 and G1 G2 G3 and Open engine.
Piston kit - 47mm diameter for 70cc R4R cylinder kit for gear box mopeds equipped with the Derbi Euro 2 or 3 engine.
Supplied with piston rings, pin and circlips.
Piston kit - 47mm diameter for 70cc R4R cylinder kit for gear box mopeds equipped with the Derbi Euro 2 or 3 engine.
Supplied with piston rings, pin and circlips.
Bidalot complete cast iron piston RF50WR 39.95 mm racing replica, height 22 mm, centered ring pin, chromed steel ring 40 x 1 mm. For Derbi Euro 2/3 and G1 G2 G3 and Open engine.
Bidalot complete cast iron piston RF50WR 39.95 mm racing replica, height 22 mm, centered ring pin, chromed steel ring 40 x 1 mm. For Derbi Euro 2/3 and G1 G2 G3 and Open engine.
Exhaust flange R50 / 70WR Ø30xL30 Bidalot
Allows the adaptation of your exhaust on our high motors RF50WR and RF70WR.
Check the fitting diameter at the inlet of your exhaust, and choose the corresponding flange, depending on its outside diameter.
Exhaust flange R50 / 70WR Ø30xL30 Bidalot
Allows the adaptation of your exhaust on our high motors RF50WR and RF70WR.
Check the fitting diameter at the inlet of your exhaust, and choose the corresponding flange, depending on its outside diameter.