A set of 4 sets of 6 rollers of 16x13mm. They are of different colors to be able to recognize them quickly. There are 1 sets of 4gr, one of 4.5gr, one of 5.0gr and one of 5.5gr. You can of course mix by 3 these different weights which gives these possibilities: 6 x 4gr = 24gr 3 x 4gr + 3 x 4.5gr = 25.5gr 6 x 4.5gr or 3 x 4gr + 3 x 5 gr = 27gr 3 x 4.5gr...

variator roll / load  set 15 x 12 for standard Minarelli and CPI, generic, Neco, Keeway  variator, 22 different weight

Variator rol set 4x 6 rolls 15x12mm 4g / 4.5g / 5g / 5.5g

Complete oil seals set Nitro, Aerox, Booster, Bws, Stunt, Slider, Ovetto, Neos, Jog. 1x 17x28x5mm / 1x 22x32x6mm / 1x 20x42x8mm / 1x 20x30x6mm

Variator Motorkit racing for a better progresivity and acceleration. Fits all scooter with Minarelli engine.

Variator rolls set for Piaggio and MHR TEAM 19 x 15.5 mm

Half Pulley / vario fan Nitro, Aerox, Booster, Bw's, Ovetto, Neos, Jog, Mach G, Sr - Standard -  and all Minarelli engine

Krank shaft nut M10 x 1.25 for 14 mm socket wrench

Stars for half pulley for scooter Minarelli 13mm    

Variator Polini Hi-Speed for  Booster / BW'S / Nitro /Aerox / Jog / Stunt / Slider

Rollers for variator Polini 16x13 ( 3.5 - 4 - 4.5 - 5g )

Rollers for variator Polini 16x13 ( 4.5 - 5 - 5.5 - 6g )

Rollers for variator Polini 16x13 ( 2.5 - 3 - 3.5 - 4g )

Hi Speed variator Pack Drive Polini for all scooter with Minarelli engine . with 1belt,  different roll set and 2 pression springs

Minarelli Nitro Booster oil cap Cut from solid aluminium, the KRM cap is anodised in either black or red and laser-engraved for a flawless finish. It comes with an O-ring to ensure a good seal.

Fixed pulley / half pulley for racing variator - in Teflon treated aluminium - inner diameter: 13mm. for all 50cc - 2 stroke scooters equipped with the Minarelli vertical or horizontal engine: Aprilia Amico 2t (1992-1998) Aprilia Amico 50 AIR 2T '96-'98 Aprilia Amico GL 50 AIR 2T '94-'95 Aprilia Amico LX-...

Variator restrictor for Minarelli

Variator tabs Nitro - Booster - Aerox - Bw - Stunt - Ovetto - Jog for original angle disk

Rollers caps replacement kit  Polini diam. 15 x 12 (for original vario)  12  pc for  6 rolls  + 3 variator plate guides

Transmission cover / carter Nitro, Aerox, Booster, Bw's, Ovetto, Neos  and all Minarelli. Without bearing nor oil seal, genuine parts

Transmission gasket Booster, Nitro, Bws, Aerox, Stunt, Slider, Ovetto, Jog, Mach G, Neos, Aprilia SR and all Minarelli scooter

Half pulley Polini Air Speed Evolution 3 for all Minarelli scooter engine. Ceramic tecnology.

 3 Malossi Vario  tabs for Multivar variateur. Fits also MHR 2000, Polini Speedcontrol, Bidalot and Motorkit varios

Variator Conic washer Nitro, Aerox, Booster, BW, Ovetto, Stunt, Neos, Slider, Jog, Mach G, aprilia SR and all Minarelli motors

Vario Malossi Nitro, Booster, Aerox, Bws, Ovetto, Stunt, Neos, Slider, Mach G, Aprilia SR  and all scooters with Minarelli engine, Multivar

Transmission Doppler Booster / Bw's / Stunt / Slider 14 / 42 -13

Variator bushing- ring spacer 5 mm for Malossi Multivar Nitro Aerox Booster Bw and other scooter with Minarelli engine

Polini variator bush - axle for Nitro Aerox Booster Bw's Ovetto Neos Stunt Aprilia SR and all scooter with  Minarelli engine 20 x 13 x 38 mm

Rollers caps replacement kit  Polini diam. 16 x 13 (for sport vario)  12  pc for  6 rolls  + 3 variator plate guides

Secondary gear box Malossi 14/43 Nitro, Booster, Aerox, Bws, Stunt, Ovetto, Slider, Jog, Mach G...and all  Minarelli engines

Variator cover Booster - Bws - Stunt - Slider - Aprilia SR chrome

Transmission gear Malossi  Booster, Nitro, Bws, Aerox, Stunt, Slider, Ovetto, Jog, Mach G, Neos Xtra long : 16/40

Vario MRH TEAM version 2006 with large rollers (diameter 19mm). The electric starter must be absolutely removed. For any Minarelli motor scooter with racing configuration.

fixed pulley Variator  - vario fanfor minarelli scooter engine.

Rear pulley shaft and primary gear ratio very close to the origin (15 - 50) for gear box MBK Nitro, Booster, Stunt, Mcah G, Ovetto - Yamaha Aerox, Bw's, Slider, Neos, Jog - Aprilia SR WWW, Stealth,...

Malossi Mutivar vario bushing - axle for all 50cc 2 stroke scooter with Minarelli engine . Dimension 20 x 13 x 43.2 mm

Rear transmission vent hose for Nitro, Aerox, Beta Ark, Booster, Bw's, Ovetto, Neos, Stunt, Slider, Aprilia SR and any 50cc 2-stroke scooter with a vertical or horizontal Minarelli engine. Original part.

Pack Malossi Over-range aluminium for Minarelli engine

Variateur Racing Top performance Minarelli

Rear wheel axle  Nitro, Booster, Ovetto, Aerox, Stunt, Neos, Bws, Mach G, Aprilia SR and all scooters with Minarelli engine 

Doppler Racing SX89 Evo clutch for 50cc scooters : Minarelli 107 Nitro Aerox Booster Bw's - Peugeot - Gilera - Piaggio - Sym - Kymco and Wallaroo / Fox The result of Doppler's involvement in timed RUN competitions, it has been designed to handle high power levels thanks to its reinforcement plate and reinforced friction linings. The springs that open the jaws are mounted on...

Malossi MHR-Team 2000 aluminum variator for MBK Nitro Booster Mach G - Yamaha Aerox Bw's Jog - Aprilia SR - Beta Ark and any 50cc scooter with Minarelli engine. Mounts directly on the standard crankshaft (we recommend a reinforced one). Includes: Variator, ramp, guides, axis, fixed pulley, K4.7 thrust spring and 2 sets of rollers diameter 19mm (3.5 and 3.8...