MOTORKIT graduated oil measuring bottle For quick and easy 2-stroke mixing.

Main jet for carburator Gurtner and keihin 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110, 115.

Inlet / reed valves gasket Honda Wallaroo, Peugeot Fox, Kymco DJ

Main jet kit 5mm for dellortho PHBG. different possibilities : - from 70 to 92 - from 88 to 110

Carbon racing reedvalve slat for Honda Wallaroo and Peugeot Fox - Speedfight - Vivacity - Buxy as well as any Peugeot 50cc 2-stroke scooter with vertical engine. Thickness 0.35mm. The composition, the sealing, the elasticity and the thickness of the intake valve blades have a major influence on the behaviour of the 2-stroke engine. In general, the thickness of these blades is...

 Polini Carbon reed valves for Honda Wallaroo, Peugeot FOX, Buxy, Speedfight 1 en 2, TKR, Squab.. Blue = 0.30 mm (for standard cylinder) Green = 0.35 mm (for sporting cylinder)

filter foam Honda Wallaroo standard

Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 75 till 98. 75/78/80/82/85/88/90/92/95/98 Mainjet kit  for Gurtner-keihin carburator. Kit of 10 mainjets from 54 till 72. 54/56/58/60/62/64/66/68/70/72

Reed valve racing type for Wallaroo / Fox With carbon petal valves

Reed valve original type for Wallaroo / Fox With stainless steel plate valve

Carburator 19,5mm  Dellorto PHBG réplica , main jet typ 5mm for cable starter. The air and idle screws settings are located on the left side

4 O-Ring seals for renovation of Honda Wallaroo original carburetor

Fuel float needle for Gurtner carburetor 14 mm (standard) for Peugeot Speedfight, Vivacity, Buxy, Trekker, Squab, Fox ..- Kymco Super8, Super9, Top Boy, Agility ... 2 stroke and Honda Wallaroo.

Carburator 21 mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side For aluminium manifold, outside diameter : 24 mm It is sold with a 1/4 turn manual choke system. It is designed for a 28 mm diameter air filter, but thanks to its threaded support, it can be fitted with a suction funnel that will allow all 48...

Inlet / manifold isolator for scooter Peugeot Speedfight 1 and 2, Vivacity, Buxy, Trekker, Elystar, Elyseo, Fox and Honda Wallaroo with O ring

Air box racing Polini Peugeot 103 for carburator CP

Air filter type K&N for Wallaroo. Suitable on Dellorto PHBG Fixing diameter 28mm, sleeve length 65mm, total length 113mm, external filter diameter 61 / 51mm

Dellorto carburator PHBG 19,5 mm female for cable choke / starter adjustable screws on right side

Dellorto PHBG 19 mm rigid carburetor - left adjustments The air and idle screws are located on the left side (particularly useful in the case of Honda Wallaroo) and it is designed to be mounted on an aluminum intake pipe with an outside diameter of 24 mm. It is sold with a manual pull-tab choke system, but this can be replaced in a jiffy by a <a...

Manifold / inlet pipe Malossi Wallaroo for Dellorto from 17.5 to 21 mm

Reedvalve carbon Malossi Peugeot / Honda Wallaroo

Carburator 17.5mm PHBG to fit on alloy manifold 24mm diameter

Carburetor float supplied with axle for Honda Wallaroo PK - CRF50 - Z50R. Alternative part. <div class="tlid-result-transliteration-container...

Gurtner carburettor slider cap for Honda Wallaroo - Peugeot Fox. Supplied with O-ring. Genuine part

Carburator 21 mm  Dellorto PHBG , main jet typ 5mm For aluminium manifold, outside diameter : 24 mm

Malossi carburettor kit for Honda Wallarroo 17.5mm PHBG Complete plug and play kit: pre-set Dellorto PHBG 17.5mm carburettor, reed valve gaskets, intake manifold, throttle cable and choke system.

Carburetor Polini CP Evolution 19mm male (carburetor enter the manifold), ext. diam.  29mm , filter fixing 46mm or  61mm with Polini funnel included in the pack.

Polini manifold - inlet pipe Wallaroo for Dellorto PHBG carburetor from 17.5 to 21 mm

cable choke control kit for Keihin PE - PWK - CR mini - WALLAROO - Motocompo carburetors. Genuine part M12 x 1mm

Inlet / reed valves gasket Honda Wallaroo, Peugeot Fox, Kymco DJ

Carburator 17,5mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side. For aluminium manifold, outside diameter : 24 mm