Rear sprocket spacer Monkey Opus , available in 1 or 3mm. Allow you to adjust offset of the sprockets. Inner diameter 38.2mm 

Monkey wheel spacer

Kitaco anodised aluminium wheel dress up kit. It can be mounted on genuine Honda Monkey wheel or on Kitaco rim. Available in red, bleu or gold

Front hub Monkey for disc, axle 12mm

Set of 2 hubs (front + rear) for Honda Monkey - Gorilla and Singa Chimp Skymini The front is provided for a disc brake mount (skyteam spacing, Chinese) The rear provided for the drum brake and is supplied directly with the support and the brake pads. ...

Offset spacer 1, 2 or 3mm for monkey hub

Set of 2 wheel hubs (front + rear) for Honda Monkey Z50 Gorilla and replicas. Black lacquered model. The front is provided for a disc brake mount (skyteam spacing, Chinese) <span...

Front hub Monkey drum,  axle 12mm

Rim spacer 1mm for Honda Monkey Z50 Gorilla and Singa Jincheng Chimp Skymini Skybongo

10mm hub spacer for Monkey rims. Allows the installation of offset rims on centred hubs.

Axle shaft Ø12mm 220mm Kitaco

Takegawa Monkey hub ring. It allows to reinforce the hub with a billet aluminium part . It is available in : - Black or Natural Aluminium

G-craft BLACK rear hub, original sprocket assembly and Honda NSR rear disc. For 4.0 wide rims. Compatible with G-craft part numbers 33165 and 33184 matching caliper bracket 33192. Hub dimensions (from wheel mounting surface) Sprocket side Sprocket side: 73.1 mm Disc side: 59.5 mm <div...

Front hub G-craft for Monkey, for 173mm front fork, black color

Axle shaft Ø12mm 210mm Kitaco

Hollow wheel axle Ø 12mm, length. 190 mm, internal diameter 5 mm, weight 134 grs (origin 180 Grs). By Kitaco.

G'Craft black anodized aluminum rear wheel hub for Honda Monkey Gorilla and Singa Skymini Chimp. Mounts with original sprocket and Honda NSR rear brake disc. Planned for wheels 2.5 to 3.5 inches...

Rear hub Monkey drum

Anodised aluminium screw kit from Kitaco for genuine Honda money and kitaco 's hub. Available in bleu, gold or red

Kepspeed CNC aluminum Drum flange / brake shoes holder "Closed" for rear hub on Honda Monkey Z50J - Gorilla. Comes with spacer 12 x 24 x 16 mm

Kepspeed CNC aluminum Drum flange / brake shoes holder Openwork rear hub for Honda monkey - Gorilla (not for replicas). Comes with spacer 12 x 24 x 16 mm ...

Hollow Axle shaft Ø 12mm, lenght 254 mm, inside diameter 6 mm. By Kitaco

Rear hub monkey Takegawa for drum brake and with sprocket on damper.

12 mm hub spacer for Monkey rims. Allows the installation of offset rims on centred hubs.

Kitaco front hub for 30mm fork and provided for mounting a rim of 3.15 inch.

Kitaco front hub black for 30mm fork and provided for mounting the rim of origin of 2.15 inch.

Offset spacer 8 mm Monkey, for wide wheels.

Kepspeed CNC aluminum Drum flange / brake shoes holder "OPEN" for front hub on Honda Monkey Z50J - Gorilla (not for replicas). Comes with spacer 12 x 24 x 16 mm

Kepspeed CNC aluminum Drum flange / brake shoes holder "Closed" for front hub on Honda Monkey Z50J - Gorilla (not for replicas). Comes with spacer 12 x 24 x 16 mm

Axle swingarm Monkey Ø10mm 192mm Kitaco

Rear hub Kepspeed CNC wide Hub CNC Wide for the mounting of wide rim (4.0 and 4.5 "). Requires a swing-arms wide as well. Dimensions are on the picture. For disc brake mount (skyteam type center distance) and fixation for the rear sprocket type Monkey.

Rear hub Super Wide G-Craft disk brake Monkey. It's only fit with a wide swingarm and 20mm sprocket spacer.

Monkey wheel spacer 3mm

Kitaco aluminum front hub for fork diameter 30mm. Designed for mounting a 2.50 "wide rim and a brake disk, supplied with spacers and screws. For Honda Monkey Gorilla en Singa Skymini Chimp Skybongo

G'Craft aluminum 9.5mm offset for 190mm brake disc. For Honda Monkey Z50 - Gorilla and Skyteam Chimp Singa Skymini Skybongo. Supplied with screws. <div...

REINFORCE PLATE FOR WHEEL

Offset brake disk 13mm

G-craft rear hub, original sprocket assembly and Honda NSR rear disc. For 4.0 wide rims. Compatible with G-craft part numbers 33165 and 33184 matching caliper bracket 33192. Hub dimensions (from wheel mounting surface) Sprocket side Sprocket side: 73.1 mm Disc side: 59.5 mm

Front hub G-craft for Monkey, for 199mm front fork

Front hub G-craft for Monkey, in black, for 199mm front fork

G'Craft silver anodized aluminum rear wheel hub for Honda Monkey Gorilla and Singa Skymini Chimp. Mounts with original sprocket and Honda NSR rear brake disc. Planned for wheels 2.5 to 3.5 inches wide.

Offset spacer 4 mm Monkey, for wide wheels.

Axle shaft Ø12mm 257mm Kitaco

Monkey wheel spacer 7mm