POLINI clutch springs for standard clutch for Minarelli engines : 4 different colors, 4 different hardness See below.

Nut 10 x 1 mm to fit clutch housing on all scooter with Minarelli  engine and Chinese 2 stroke. Thickness 8 mm, for 17 mm wrench Also for Zundapp flywheel

Adjustable racing clutch Nitro, Aerox, Booster, Bws, Ovetto, stunt, Slider and Peugeot, Honda and Piaggio scooter  - 107 mm diameter - Supplied with two different springs set and a torsion controller. 3 jaws, diameter 107 mm. Fine tune the moment when your clutch hangs.

Standard clutch plate for Nitro, Aerox, Booster, Bws, Ovetto, stunt, Slider, Speedfight, Kisbee, Vivacity, Ludix, Fox, Wallaroo, SFX, Bali, X8R, Typhoon, Zip, Runner... and on most 50cc scooters with Minarelli, Peugeot, Honda, Sym, Kymco engines - diameter 107mm - pad thickness: 18mm - thickness with support: 28mm

Clutch springs set for all 2 stroke 50cc scooter with Minarelli engine. 3 different hardness: Green 1.8mm Blue 2.0mm Red 2.3mm

Clutch bell Nitro, Aerox, Booster, Bws, Ovetto, stunt, Jog, Neos, Aprilia SR - standard, 107 mm diameter

Clutch nut Nitro, booster, Aerox, bw's, Ovetto, Stunt, Neos, Slider, Cpi, Keeway, Aprilia SR - 10 x 1 mm

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  White, + 30% Ø53,1x110mm Øwire 3,8mm.  

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  Red, + 40%

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  Yellow, + 35% Ø53,5x115mm Øwire 3,7mm

17 x 25 x 18mm rear variator needle cage for motor scooters: Minarelli 2S 50 cc Piaggio 2S 50 cc Kymco 2S 50 cc Peugeot 2S in 4S 50 cc Sym 2S in 4S 50 cc

Torsion controller Maloss for Nitro, Aerox, Booster, Bws, Stunt, Ovetto, Slider, Neos, Jog, Mach G, CPi, Keeway, Generic, Neco

Clutch Polini For Race 3 Ø107mm Minarelli?

Flat nut - 29 x 1 - maintaining clutch to rear variator for all 50 cc scooter with Minarelli engine

Set of 3 types of springs of different hardness for 3G Polni clutch. - Green 1.8mm - torque 4.000-5.500 TRM - Yellow 1.9mm - torque 5.500-6.500 TRM - Blue 2.0mm - torque 6.500 - 7.500 TRM Spare parts for the following Polini clutches: 249.046- 249.047- 249.048- 249.049- 249.050- 249.051- 249.061- 249.062

Clutch bell Polini Booster, Bws, Nitro, Jog, Stunt ,  Mach G, Ovetto,  Aprilia SR, Benelli,  Minarelli, 107mm, standard

Clutch Top Performance Nitro, Aerox, Booster, Bws, Ovetto, stunt, Jog, Neos, Aprilia SR, standard, 107 mm diameter  

Clutch springs set for all 2 stroke 50cc scooter with Minarelli engine. 3 different hardness: Green 1.8mm Blue 2.0mm Red 2.3mm

Set of 3 blue springs for Malossi Fly Clutch and Delta clutch jaws. Wire diameter: 2.1mm (very high hardness).

Racing Cool clutch Bell  -107 mm diameter - forced cooling for Nitro Aerox Booster Bw's Ovetto Neos Mach G Aprilia SR and any 50cc scooter with 2 stroke Minarelli engine

Spring clutch for Polini 2G

3 Spring set MHR for Fly/Delta clutch

Clutch bell Malossi racing wing Nitro, Aerox, Booster, Bw, Ovetto, Néos, Mach G, Aprilia SR, Benelli and all scooter with Minarelli engine and 107 mm clutch

Polini rear pulley variofan for all scooters 50 cc - 100 / 125 cc. Between pulley and spring

Set of 2 Washers for Minarelli Over Range pulley Malossi

Racing clutch Naraku sport  Nitro, Aerox, Booster, Bw's, Ovetto, Stunt, Slider, Neos, Jog, Aprilia SR, 107 mm, light weight, hard springs

Malossi Wing clutch bell Nitro, Aerox, Booster, Bw's, Ovetto, Stunt, Slider, Neos, Jog and all scooters with Minarelli engine

Clutch with bell and rear variator complete Nitro, Aerox, Booster, Bw's, Ovetto, Neos, Mach G, Jog, Aprilia SR with Minarelli engine and CPI, Keeway, Generi, Neco, Grido

Automatic Delta clutch from Malossi.

Malossi clutch "Fly" 107mm Nitro Aerox, booster and bws

Starter clutch Naraku reinforced for Nitro Aerox Booster Bw's Slider Stunt Ovetto Neo's Aprila SR Jog Mach G and all scooter 50cc 2-stroke engine Minarelli

Pack Malossi Over-range aluminium for Minarelli engine

Clutch + bell kit Malossi racing Nitro, Aerox, Booster, Bw's, Ovetto, Stunt, Slider, Neos, Jog - Delta System 107mm

Clutch springs MHR for Malossi Fly / Delta clutch, 3 different set

Torque driver Nitro, Aerox, Booster, Stunt, Ovetto, Mach G, Neos Top performance with + 8% spring

Polini Wing clutch bell Polini Booster , Bws , Nitro , Aerox, Jog , Stunt , Ovetto, Slider, Mach G - 107 mm diameter

Racing Rear pulley complete Malossi, for all scooter with Minarelli engine, to be used exclusively with Over-range belt. Allows you to gain speed without losing at startup

Doppler Racing SX89 Evo clutch for 50cc scooters : Minarelli 107 Nitro Aerox Booster Bw's - Peugeot - Gilera - Piaggio - Sym - Kymco and Wallaroo / Fox The result of Doppler's involvement in timed RUN competitions, it has been designed to handle high power levels thanks to its reinforcement plate and reinforced friction linings. The springs that open the jaws are mounted on...

Clutch bell Malossi Nitro, Aerox, Booster, Bw, Stunt, Slider, Mach G, Jog, 107mm

Polini evo rear squeeze spring Nitro, Aerox, Booster, Bws, Ovetto, Stunt, CPI, Neos, Jog, Mach G and all scooter with minarelli engines