A set of 4 sets of 6 rollers of 16x13mm. They are of different colors to be able to recognize them quickly. There are 1 sets of 4gr, one of 4.5gr, one of 5.0gr and one of 5.5gr. You can of course mix by 3 these different weights which gives these possibilities: 6 x 4gr = 24gr 3 x 4gr + 3 x 4.5gr = 25.5gr 6 x 4.5gr or 3 x 4gr + 3 x 5 gr = 27gr 3 x 4.5gr...

variator roll / load  set 15 x 12 for standard Minarelli and CPI, generic, Neco, Keeway  variator, 22 different weight

Variator rol set 4x 6 rolls 15x12mm 4g / 4.5g / 5g / 5.5g

Variator Motorkit racing for a better progresivity and acceleration. Fits all scooter with Minarelli engine.

Variator rolls set for Piaggio and MHR TEAM 19 x 15.5 mm

Half Pulley / vario fan Nitro, Aerox, Booster, Bw's, Ovetto, Neos, Jog, Mach G, Sr - Standard -  and all Minarelli engine

Krank shaft nut M10 x 1.25 for 14 mm socket wrench

Stars for half pulley for scooter Minarelli 13mm    

Variator Polini Hi-Speed for  Booster / BW'S / Nitro /Aerox / Jog / Stunt / Slider

Rollers for variator Polini 16x13 ( 3.5 - 4 - 4.5 - 5g )

Rollers for variator Polini 16x13 ( 4.5 - 5 - 5.5 - 6g )

Rollers for variator Polini 16x13 ( 2.5 - 3 - 3.5 - 4g )

Hi Speed variator Pack Drive Polini for all scooter with Minarelli engine . with 1belt,  different roll set and 2 pression springs

washers set (30pcs) for Minarelli variator. To ajust the height of the belt. 13 x 18.5 mm 13x18,5x0,6mm 13x18,5x0,8mm 13x18,5x0,35mm 13x18,5x1,0mm

Fixed pulley / half pulley for racing variator - in Teflon treated aluminium - inner diameter: 13mm. for all 50cc - 2 stroke scooters equipped with the Minarelli vertical or horizontal engine: Aprilia Amico 2t (1992-1998) Aprilia Amico 50 AIR 2T '96-'98 Aprilia Amico GL 50 AIR 2T '94-'95 Aprilia Amico LX-...

Variator restrictor for Minarelli

Variator tabs Nitro - Booster - Aerox - Bw - Stunt - Ovetto - Jog for original angle disk

Rollers caps replacement kit  Polini diam. 15 x 12 (for original vario)  12  pc for  6 rolls  + 3 variator plate guides

Half pulley Polini Air Speed Evolution 3 for all Minarelli scooter engine. Ceramic tecnology.

 3 Malossi Vario  tabs for Multivar variateur. Fits also MHR 2000, Polini Speedcontrol, Bidalot and Motorkit varios

Variator Conic washer Nitro, Aerox, Booster, BW, Ovetto, Stunt, Neos, Slider, Jog, Mach G, aprilia SR and all Minarelli motors

Vario Malossi Nitro, Booster, Aerox, Bws, Ovetto, Stunt, Neos, Slider, Mach G, Aprilia SR  and all scooters with Minarelli engine, Multivar

Crankshaft spacer Nitro/booster

Variator bushing- ring spacer 5 mm for Malossi Multivar Nitro Aerox Booster Bw and other scooter with Minarelli engine

Polini variator bush - axle for Nitro Aerox Booster Bw's Ovetto Neos Stunt Aprilia SR and all scooter with  Minarelli engine 20 x 13 x 38 mm

Rollers caps replacement kit  Polini diam. 16 x 13 (for sport vario)  12  pc for  6 rolls  + 3 variator plate guides

Vario Polini  racing Evolution R02 for all Minarelli engine. supplied with 19x15.5mm roll set

3 Malossi Variator tabs for MHR TEAM

Vario MRH TEAM version 2006 with large rollers (diameter 19mm). The electric starter must be absolutely removed. For any Minarelli motor scooter with racing configuration.

Variator kit Malossi Over Range MHR TEAM for Minarelli engines : variator + special belt + rear pulley complete

fixed pulley Variator  - vario fanfor minarelli scooter engine.

Malossi Mutivar vario bushing - axle for all 50cc 2 stroke scooter with Minarelli engine . Dimension 20 x 13 x 43.2 mm

Variator axle Malossi 20x16x45mm

Pack Malossi Over-range aluminium for Minarelli engine

Star for MHR-Team variator. Also for over-range pack.

Variateur Racing Top performance Minarelli