Idle jet Mikuni VM26 kitaco, price for one.

Main jet kit Mikuni TM/VM, set of 10 jet. Fit only on real Mikuni carburator. For copies please check dimensions.   Please note attention: These jets are noted in hole diameter. (1mm = 100 // 1.25mm = 125). The original Mikuni are in flow number.

Idle jets kit for Mikuni VM TM carburetor from 0.125 to 0.35 includes 12.5 / 15 / 17.5 / 20 / 22.5 / 25 / 27.5 / 30 / 32.5 / 35

Billet air screw Takegawa for carburator Mikuni VM 26. Available in red, blue, black and aluminium. Now, you can change your original model (sometimes in plastic) with a real perfect parts. 100% CNC made from solid aluminium. Perfect quality.

Long air richness adjustment screw for Mikuni VM26 first generation carburettor. The original screw is difficult to access as it is placed under the tank, here is a solution with this 23mm longer screw. It is now accessible and will allow you to fine tune your carburettor more easily. Delivered with spring and O-rings.

Set of 10 Polini main jet for Mikuni VM-TM: either from 180 to 270 or from 280 to 370 Attention: the size of the jets is expressed in flow rate like the Mikuni originals.

Float chamber gasket Mikuni VM26 - 672U PZ27 for BS0096 Paper gasket in place of rubber

Needle seat fiber seal for Mikuni VM26 carburetor. Diameter ext.12 mm, int. 8.5 mm. Genuine part

Takegawa carburator aluminium drain bolt red for Mikuni VM26. Supplied with sealing gasket. The cap contains a small magnet that attracts all the metal particles in the gasoline and protects your engine.  

Takegawa carburator aluminium drain bolt Black for Mikuni VM26. Supplied with sealing gasket. The cap contains a small magnet that attracts all the metal particles in the gasoline and protects your engine.  

Takegawa  blue billet throttle adjust screw for MIKUNI VM 26 carburetor

Takegawa carburator aluminium drain bolt Blue for Mikuni VM26. Supplied with sealing gasket. The cap contains a small magnet that attracts all the metal particles in the gasoline and protects your engine.  

Idle screw O-ring seal for Mikuni VM20 -  VM26 carburettor - Genuine Part distributed by Kitaco

Choke / Starter lever for Mikuni VM26 Kitaco

Idle screw for Mikuni carburettor VM26

Carburetor tank plug for  Mikuni VM26 by Kitaco

Mikuni VM26 carburetor float tank with drain plug and O-ring - Original part, dispatched by Kitaco <div...

Float chamber gasket Kitaco for Mikuni VM20