TK jet for MV33 carburettor, sold by piece M5 x 0.8mm

Kit of 10 TK MV33 mainjet 122-125-126-128-129-132-134-135-136-145 M5 x 0.8mm <span...

Mikuni VM26mm carburetor for Dax / Monkey. Carburator valve dimension: height:21mm, width:max:16mm, min:13mm.

Complete Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ... Consists of a multi-positionable intake manifold, a sleeve, a PE24 carburetor and an inclined air filter - foam (diameter: 90mm - length: 75mm) Main jet type DO 5mm: 105mm PE / PWK idle jet: 40mm

PZ22 carburetor kit for Dax / Monkey. Supplied with the bigger intake pipe diameter with an offset to the left.  For mounting on a dax, please also provide an external fuel cock.  With this inlet, it is not possible to reuse the original air box. Perfect for use for engine between 75 and 125cc.  Carburator valve dimension: height:21mm, width:max:16mm,...

Carburator kit PZ16mm for Dax / Monkey The carburetor is equipped with an integrated fuel valve and a choke with cable. main jet type keihin 4mm, # 70 idle jet specific # 32 Filter diameter 37mm

Nibbi PZ14mm carburettor without fuel tap for 50cc 4 stroke mini. Air filter inlet 30mm, section 12.5mm, mounting flange 38mm 2 x M6. Main jet: 55 Gurtner type Idle jet 35 type keihin PC

Kit Daytona MV33 vacuum / diaphragm carburetor for the Anima 150 - 190 engines and <span...

22mm carburetor kit for Dax / Monkey. Supplied with the bigger intake pipe diameter with an offset to the left.  For mounting on a dax, please also provide an external fuel cock.  With this inlet, it is not possible to reuse the original air box. Perfect for use for engine between 75 and 125cc.  Carburator valve dimension: height:21mm, width:max:16mm,...

Carburetor kit Kei PE 28mm. Special for Zongshen / Daytona Anima and fit on Dax / Monkey It consists of an intake pipe (ZS / Anima center distance) with its sleeve, the 28mm PE carburettor and a double foam air filter. Ø118 main jet Ø40 idle jet

Mikuni VM24 carburetor kit and gaskets. For Honda Dax ST CT Cub Monkey CRF ZB and Skyteam Singa TNT City and other replicas This is the Mikuni VM24 round bushel and it has the same external dimensions as the VM26. <span class="tlid-translation...

JK PE 22mm venturi 24mm carburettor kit for Honda Dax Monkey Cub and Skyteam and other copies - .96 main jet type 5mm - .32 keihin pwk idle jet - 38mm air filter inlet - flange mounting: 2 x 6mm screws 48mm apart, 7mm offset  Inlet pipe and double foam filter supplied.

PE28 carburetor kit, 28mm special diameter for Zongshen190 and Daytona Anima 190 engine   It consists of...

Complete Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ... Consists of a multi-positionable intake manifold, a sleeve, a PE28 carburetor and an inclined air filter - foam (diameter: 90mm - length: 75mm) Main jet type DO 5mm: 120 PE / PWK idle jet: 40

Complete Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ... Consists of a multi-positionable intake manifold, a sleeve, a PE26 carburetor and an inclined air filter - foam (diameter: 90mm - length: 75mm) Main jet type DO 5mm: 110mm PE / PWK idle jet: 40mm

Carburetor Kit Keihin Kitaco 20 Pc. Sold with the intake pipe reducer diameter (to fit on the head of Genuine Honda), 20 Pc Keihin carburetor Kitaco and reviewed by a cable type gas Honda.

Carbu TMR-M JN 28mm Yoshimura, livré avec set de gicleur.

Kit carburateur Kitaco VM 26 passage sur la gauche. Ce kit est livré complet prêt à monter: carburateur, pipe, poignée de gaz, cable de gaz, 2 gicleurs (130 et 140, montage std 150 et ralenti 15). Prévoir un filtre diametre 45mm

Complete carburator kit, keihin 20mm from Kitaco, with speed inner throttle for Honda type

Intake Yoshimura YD Mjn-24mm. Set composed of carburetor Yoshimura YD Mjn-24mm and the intake pipe special. Carburetor high-end from billet gathering all hyper efficient technologies from...

Intake Yoshimura YD Mjn-28mm. Set composed of carburetor Yoshimura YD Mjn-28mm and the intake pipe special. Carburetor high-end from billet gathering all hyper efficient technologies from...

Takegawa PD22mm carburettor kit, complete ready to mount, pre-set for 88cc, 810mm throttle cable.

Kitaco  Keihin PE 24mm carburetor kit - positioned on the left. It comes with flexible mounting pipe, gaskets, throttle and gas cable, fuel cock. It is mounted with a main jet of 95 and idle of 35 but in order to refine...

Keihin PE24 carburetor kit for Honda Dax Monkey Gorilla Chaly SS Cub and Skyteam Singa City and other replicas. Includes carburetor, positionable intake manifold, flexible mounting sleeve, dual density air filter, gasket and 2 bolts

VM26mm carburetor kit for Dax / Monkey. Supplied with the bigger intake pipe diameter with an offset to the left. For mounting on a dax, please also provide an external fuel cock. With this inlet, it is not possible to reuse the original air box.    Carburator valve dimension: height:21mm, width:max:16mm, min:13mm. Main jet 5mm size...

Kit carburator Oko Pwk 28mm for Dax / Monkey

Kit carburateur Kitaco Keihin PWK 28mm pour grosses cylindrées. Ce kit est livré complet prêt à monter: carburateur, pipe, poignée de gazs, cable de gaz, 2 gicleurs de 95 et 115 (montage std 135 et ralenti 38). Passage du carbu sur la gauche. Prévoir un filtre de diametre 52mm..

Complete carburator kit, keihin 20mm from Kitaco, complete set with speed throttle.