Special tool for Honda 4 stroke engines.

Clutch nut tool Honda, JC, Skyteam, Zongchen, etc ... Suitable for all models: either with clutch on crankshaft or gear box axle. The 2 diameters of 25 and 30mm are compatible with the 2 types of existing nuts. This new reference has been extended to allow disassembly and reassembly of oil filter and clutches on  Honda MSX GROM and Monkey 125cc

tool for valve

Flywheel  puller 27 mm x1, left thread for Honda, Yamaha, Suzuki, MBK, CPI, Skyteam

Silentbloc K-CON  Inner diameter = 9mm External diameter = 14mm Thickness = 7.5mm

clutch nut dismantling sleeve for Daytona Honda YX Lifan Skyteam Zongsheng engines Its outer diameter reduces to 16 mm allows to disassemble the nut and remove the clutch in one piece.

Disassembly Wrench - tool for clutch when placed on the gearbox shaft for Honda Dax ST CRF Cub Cub Chaly Gorilla. Also for Skyteam replicas, TNT City, Singa, Jincheng, Zenhua ....

Button Head Cap Bolts with flange Stainless M6 P 1.0 Available : - M6 x 12 - M6 x 15 - M6 x 20 - M6 x 25

Thickness gauge with calibrated blades for the adjustment of the valves. Provided in the kit 0.05 and 0.08 mm that are used in 90% of cases for mini 4-stroke engines Honda / Zoncheng / Lifan / Takegawa / Daytona, Skyteam, Jincheng etc ....

Long nut 17x30 M10x1.25 Kitaco

Tool for Honda-Lifan clutch

Workshop stand for mini 4-stroke horizontal engines - type Dax - Monkey. The engine is fixed via the 2 engine axles and allows you to work more easily. Compatible with all Honda engines and Skyteam/Zhenhua/Loncin/Lifan/Jincheng/Zongshen/Daytona replicas, etc...

SP Takekawa magnet set for oil filter

piston stop for 4 stroke spark plug, M10 x 1.00

Clutch tool for Honda, mini 4 stroke - genuine parts : for MSX, Dax, SS, Skyteam

Tool set original Honda small

Vivid bolts Stainless for Clutch & Crankcase Kitaco for Ultra Se engine

Spark plug spanner for dohc (socket 13 long 3/8)

Mini impact driver set 7pcs

Paddock stand aluminium CNC Kepspeed for Mini4stroke

Vivid bolts Gold 24K for Kitaco Clutch USE

  Internal and external rotor disassembly / puller  tool for Kitaco ignition

Kitaco Gear Holder tool to prevent rotating when removing & installing primary drive gear / clutch outer. tightens gears by inserting this tool between gears.

Valve disassembly. Compresses the valve spring to remove clips and valve easily. Allows disassembly of valves with cup from 16.5mm to 19mm, 21mm to 23mm, 23.50mm to 25mm in diameter. <span...

Fly wheel puller for Kawasaki KLX Kitaco. Can use also on Honda engine with stator plate located on ignition case. Like Nice, innova,...

Vivid Bolts Inox for left central carter Kitaco

valve spring compressor