ZongShen Universal Black Oil Cooling Radiator - Small mounting on rubber center distance: 51.5 mm banjo fastening M12 / 1.25 dimension excluding support: 160mm x 85mm <div class="tlid-transliteration-content...

Complet gasket set for Zs190 and Anima 190FE   with electric starter. - Close the crankcase - coupling clutch housing - crankcase gasket - cylinder head and base cylinder...

Starting chain for ZongShen 190cc 2V

Spring locate plate for ZongShen 190cc 2V

Upper cylinder head cover - black or silver for Zongshen Fiddy Racer and Daytona LC 125 engines. Original spare parts.

Ignition stator for ZongShen 190cc 2V 2e version. 90mm interior. This will replace the small one in combintion with DAY88887

Right cylinder head cover gasket for Fiddy Racer and Daytona 125cc LC

Electric starter black color for Daytona Anima FE and ZongShen 190E 2V <div...

Inlet pipe for flexible carbutor mount for ZongShen 190cc 2V

Cylinder head gasket for Fiddy Racer and Daytona LC 125 engines.   Diameter: 54mm. <div...

Set of oil seals for Zongshen and Daytona 190ccc engines including: 1 x 29 x 17 x 5mm 1 x 24 x 11.6 x 10mm 1 x 26 x 16 x 7mm 1 x 20 x 12 x 5mm <span...

Right side cylinder head cover - black or silver for Zongshen Fiddy Racer and Daytona LC 125 engines. Original spare parts.

Valve cotter (1pc) for ZongShen 190cc 2V

Starting motor for ZongShen 190cc 2V

ZongShen black universal oil radiator kit with 2 banjos - 2 screws and 4 washers. Width 155 mm, Total height (with support and banjos) 154 mm, center distance 51 mm.

Inlet rocker arm axle for ZongShen 190cc 2V

Exhaust rocker arm axle for ZongShen 190cc 2V

Gearbox complete axle set for ZongShen 190cc 2V (5-speed). Second generation of gearbox with 16mm of diameter for the kickstarter idle sprocket.

Bare cylinder head for Zongshen Fiddy Racer and Daytona LC 125 engines. Available in black or natural aluminum. ...

Ignition stator for ZongShen 190cc 2V 2e version. 83mm diameter.

Left - alu silver - central crankcase - Daytona 125cc pitch type - for Zongshen 125cc Fiddy racer engine. Original part. Not suitable for Daytona 125cc generation 2019 and later engines, which have Honda type stud bolts.

Gearbox drum complete for ZongShen 190cc 2V (5-speed)

Cylinder head alone for ZongShen 190cc 2V

Inlet valve for ZongShen 190cc 2V

Exhaust valve for ZongShen 190cc 2V

Rocker arm for ZongShen 190cc 2V

Cylinder head cover for ZongShen 190cc 2V

Piston for ZongShen 190cc 2V

Shift drum plate for Zongshen ZS190 engine. Spare part.

Spring and valve kit for Zongshen 190-212cc V2 engine Intake 30mm - rod 5mm - height 76mm Exhaust 26mm - rod 5mm - height 77mm kit including: 2 valves, 4 springs, spring and key cups and 2 oil seals.

66mm Zongshen piston for 212cc kit or complete engine with pen, 2 circlips 14mm and 3 piston rings

Ignition stator with plate and wiring for Fiddy Racer and Daytona 125cc LC.engine.

Clutch housing / cover for Zongshen 190 and 212cc engines

Zongshen 140cc engine with manual clutch on crankshaft, kick start. Black crankcases, pinion cover supplied. (140cc inscription on the engine) Intake manifold supplied with the engine. As well as kick 14mm and chrome gear shift pedal Box 4 type N1234, ignition supplied 12volts 50 watt for lighting and battery recharge  

Zongshen 125cc engine with manual clutch on crankshaft, electric starter and kick. Grey crankcase, pinion cover supplied. (124cc inscription on the engine) Intake pipe supplied with the engine. As well as 14mm kick and chromed selector 4 type N1234 gearbox, 12v 50 watt ignition supplied for lighting and battery charging

Cylinder naked for Fiddy and Daytona LC 125cc bore 54mm deliverable in black or silver color.

Zongshen 140cc engine with manual clutch on crankshaft, kick start. Grey crankcase, pinion cover supplied. (140cc inscription on the engine) Intake pipe supplied with the engine. As well as kick 14mm and chrome gear change pedal. Box 4 type N1234, ignition supplied 12volts 50 watt for lighting and battery recharge

Zongshen 125cc engine with manual clutch on crankshaft, kick start. Grey crankcase, pinion cover supplied. (124cc inscription on the engine) Intake pipe supplied with the engine. As well as kick 14mm and chrome change pedal. 4G type N1234 gearbox, ignition supplied 12volts 50 watt for lighting and battery recharge

Ignition Stator + rotor for Zongshen 190 / 212cc engine 6 coils including 5 for the battery and lighting Magnetic flywheel external diameter 102mm, internal diameter 85mm

Zongshen 125cc engine with manual clutch on crankshaft, electric starter and kick. Black crankcase, pinion cover supplied. (124cc inscription on the engine) Intake pipe supplied with the engine. As well as 14mm kick and chromed selector 4 type N1234 gearbox, 12v 50 watt ignition supplied for lighting and battery charging

Gearbox complete axle set for Daytona Anima and ZongShen 190cc 2V (5-speed). First generation of gearbox with 15mm of diameter for the kickstarter idle sprocket.  

Superior chain slider for the electrical starting chain for ZongShen 190cc 2V

Inferior chain slider for the electrical starting chain for ZongShen 190cc 2V

Ignition case gasket for ZongShen 190cc 2V