PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
Carburator, inlet pipe
Carburator, inlet , pipe rubber airfilter for Honda Dax replica
Faites votre choix parmi ces catégories:
Active filters
Filter results
Main jet kit Keihin PWK and PE. 98 - 120 122- 145 148-175 180-198
€12.84Price
Carburator Daytona Mikuni VM26 for mini 4 stroke - made in Japan
Main jet # 190 (4 / 042-190)
Idle jet # 22.5 (M28 / 1001-22.5)
Needle # J8-5E75
Bushel # 1.5 (VM26 / 361-1.5)
€118.02Price
Main jet kit Mikuni TM/VM, set of 10 jet. Fit only on real Mikuni carburator.
For copies please check dimensions.
Please note attention: These jets are noted in hole diameter. (1mm = 100 // 1.25mm = 125). The original Mikuni are in flow number.
€16.76Price
Idle jet Mikuni VM/TM18 and VM/TM24 kitaco, price for one.
€5.94Price
€13.83 Tax Included
11.53 Tax Excluded
Waterproof high pressure fuel line running from the pump to the injector for "Dax" Skyteam and Zhenhua City 125 and 50cc Euro 4 with injection. Complete with 2 crimped connectors, length...
€13.83Price
Carburettor type PE with adjustments for 4 stroke engines. In 24 and 26 mm : delivered with round bushel, flexible assembly and choke by cable. In 20 and 28 mm with a manual choke. <span...
€59.50Price
Main jet kit 10 jet for carburator Keihin PC 16 - 18 - 20 - 22 and walbro carburator and Shen-Wei carburator.
This one fit also chinese scooter carburator.
Thread: M4
€14.87Price
- New
- New
Standard intake manifold for "Dax" Skyteam Skymax TNT City Zhenua fitted with the 125cc Euro 4 engine with Rojo injection.
Adaptable in "unrestricting" on 50cc models.
Supplied with O-Ring seal.
<div...
€29.70Price
€25.74 Tax Included
21.45 Tax Excluded
- Pack
- Pack
Intake manifold for "Dax" Skyteam Skymax TNT City Zhenua equipped with 50cc Euro 4 injection engine
€25.74Price
€4.91 Tax Included
4.09 Tax Excluded
- New
- New
Waterproof high pressure fuel line running from the pump to the injector for "Dax" Skyteam and Zhenhua City 125 and 50cc Euro 4 - 5 with injection.
<div class="result-shield-container...
€4.91Price
€55.49 Tax Included
46.24 Tax Excluded
- New
- New
Bluetooth box for Skyteam and Zhenhua City 125 and 50cc Euro 5 with injection. This box allows you to access the injection settings of the Skyteam and Zhenhua Euro 5 engines via the free Android ROJO motor app which you can download here.
The required access password is 333333 or 666666
<span...
€55.49Price
€19.79 Tax Included
16.49 Tax Excluded
- New
- New
Original (restricted) intake pipe for "Dax" Skyteam Zhenhua TNT City 50cc equipped with Euro 4 and 5 injection engine.
€19.79Price
€69.37 Tax Included
57.81 Tax Excluded
Rojo fuel pump for Skyteam and Zhenhua City 125 and 50cc Euro 4 with injection Reinforced version with aluminum body.
€69.37Price
€89.21 Tax Included
74.34 Tax Excluded
ROJO ECU -CDI racing box "Dax" Skyteam Zhenhua 50cc-70cc with Euro 4 engine with speed limit raised to 13,000 rpm.
The programming of the performance level is done via the Bluetooth box or via a PC.
Keep in mind that your engine warranty will...
€89.21Price
€89.21 Tax Included
74.34 Tax Excluded
- New
- New
ECU -CDI ROJO racing "Dax" Skyteam Zhenhua 125cc with Euro 5 engine with rev limit raised to 13.000 rpm.
The unboxing is automatic and direct.
You can also choose another level of performance via the Rojo application €5 and the Bluetooth connector €5 (available here as an...
€89.21Price
€54.50 Tax Included
45.41 Tax Excluded
Bluetooth box for zhenhua City 125 and 50cc Euro 4 with injection. This box allows you to access the Zhenhua Euro 4 engine injection settings via the free Android ROJO motor application that you will find here for download.
Password 333333 or 666666
By purchasing this product you declare yourself competent to...
€54.50Price
€29.70 Tax Included
24.75 Tax Excluded
- New
- New
Carburettor with integrated fuel tap for Honda Dax Monkey Gorilla
- Fixing screw distance: 42mm
- choke lever on the right
- On-off-reserve fuel tap on the right
PZ17 with a real section of 14mm
-Main jet 72 type 4mm
-Idle jet 36
€29.70Price
€5.90 Tax Included
4.92 Tax Excluded
Float needle + housing repair kit for Honda Dax ST50 ST70 CT50 CT70 original carburetor
€5.90Price
- New
- New
Complete Daytona intake manifold for Keihin PE28 carburetor for Anima engine. Supplied with rubber sleeve, gasket, clamp and screws
Version without vacuum for automatic valve.
€39.62Price
€29.70 Tax Included
24.75 Tax Excluded
- New
- New
Shen Wei 26mm carburettor for Dax - Monkey and replicas.
For 36mm air filter.
The bore is oval for the PZ type carburettor, so the dimensions are 20mm wide and 26mm high.
2 M6 mounting screws spaced 48mm apart
Total length of 68mm
€29.70Price
Idle jet Keihin/TMR 28, price for one, in diameter 30
€8.43Price
€89.21 Tax Included
74.34 Tax Excluded
ROJO ECU -CDI racing box "Dax" Skyteam Zhenhua 125cc with Euro 4 engine with speed limit raised to 13,000 rpm.
The programming of the performance level is done via the Bluetooth box
The selected curve is active as long as the smartphone is...
€89.21Price
€233.06 Tax Included
194.21 Tax Excluded
- New
- New
Conversion of Rojo 50cc injection for Skyteam and Zhenhua engines to CDI ignition and carburetor VM16 included
This kit which plugs into the original wiring harness, you will have to fit a carburetor of your choice.
includes:
1 x CDI D / C 4 pins variable and adjustable advance
1 x Wiring
1 x CDI specific high voltage coil
1 x Spark plug...
€233.06Price
Idle jet set Keihin PWK (10pcs) Keihin PWK / PE. from 35 to 58. (35.38.40.42.45.48.50.52.55.58)
€14.88Price
Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 75 till 98.
75/78/80/82/85/88/90/92/95/98
Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 54 till 72.
54/56/58/60/62/64/66/68/70/72
€12.40Price
- New
- New
Shen Wei 24mm Dax / Monkey carburettor, 36mm intake filter.
The bore is oval for the PZ type carburettor, so the dimensions are 20mm wide and 24mm high.
Attached by 2 M6 mounting screws spaced 48mm apart (not supplied).
Total length 68 mm
€29.70Price
- New
- New
Conversion of Rojo 50 / 125cc injection to CDI ignition and carburetor (not included)
This kit which plugs into the original wiring harness, you will have to fit a carburetor of your choice.
includes:
1 x CDI D / C 4 pins variable and adjustable advance
1 x Wiring
1 x CDI specific high voltage coil
Everything is pre-wired with the corresponding...
€118.02Price
Carburetor Daytona PE28, throttle 3.0, Needle JFN, mainjet 125 slow jet 40
€188.38Price
Mikuni VM 26mm carburettor 4Stroke, pre-set by KITACO.
It is equipped with a round treated bushel with a # 1.5 cut, a main jet of 150, idle 15 and a 4J13-2 needle.
...
€138.79Price
Carburetor Keihin PWK 33 Daytona
- Main jet : 165
- Idle jet : 52
- Needle 48-CGL
- Throttle slide 6.0
For filter Ø58mm
€307.39Price
- New
- New
Nibbi PZ14mm carburettor without fuel tap for 50cc 4 stroke mini. Air filter inlet 30mm, section 12.5mm, mounting flange 38mm 2 x M6.
Main jet: 55 Gurtner type
Idle jet 35 type keihin PC
€37.64Price
€177.52 Tax Included
147.93 Tax Excluded
- New
- New
Rojo 50/125cc Euro 5 fuel injection to CDI ignition and carburettor conversion kit ( Carbu not included) for Skyteam Bullet Heritage "dax"
This kit connects to the original wiring harness, you will have to fit a carburettor of your choice.
Comes with a silicone rubber case for the cdi to prevent vibration.
Includes :
1 x CDI type D/C 4 pin variable and...
€177.52Price
€11.95 Tax Included
9.96 Tax Excluded
12-way adapter for 26mm intake manifold allows you to choose the best carburetor position on your Honda or replica mini 4-stroke
€11.95Price
€18.79 Tax Included
15.66 Tax Excluded
- New
- New
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
€158.63 Tax Included
132.19 Tax Excluded
Orignal fuel injection system for "Dax" City - Skymax - Zenhua - 125cc Skyteam with Euro 4 engine
Version with the new aluminum fuel pump. Pay attention to the outlet pipe which is specific
€158.63Price
Shen Wei 18mm Carburetor Dax / Monkey
32mm filter inlet.
2 x M6 fixing screws 48mm apart
Overall length of 64.5mm
€41.60Price
- New
- New
Set of 10 Polini main jet for Mikuni VM-TM: either from 180 to 270 or from 280 to 370
Attention: the size of the jets is expressed in flow rate like the Mikuni originals.
€34.66Price
€45.57 Tax Included
37.98 Tax Excluded
- New
- New
Trail-Bike short intake pipe - left side for 20mm carburetors 48mm center distance.
Supplied with insulator, gaskets, screws and tightening...
€45.57Price
Mad-Munk intake pipe type origin for Dax. Suitable for mounting the original carburetor (16mm) with the original air filter housing. Has no flange and / or anti-pollution system.
Supplied...
€11.84Price
Carburator sheng wey PZ16mm
Mounting 2 M6 screws 47mm apart, 19mm outlet 3mm off centre
Main nozzle 68 keihin type 4mm
32 idle jet.
€29.70Price
- New
- New
Complete Daytona intake manifold for Keihin PWK 33 carburetor for Anima engine.
Supplied with rubber sleeve, gasket, clamp and screws
€39.62Price
€39.62 Tax Included
33.02 Tax Excluded
- New
- New
PZE18 with an oval inner section of 16mm
-Screw spacing: 48mm
<span class="JLqJ4b...
€39.62Price
€18.79 Tax Included
15.66 Tax Excluded
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
€19.88 Tax Included
16.57 Tax Excluded
Adjustable positioning intake pipe for Keihin PWK / Mikuni VM 26 and 28 mm carburetors. For Honda Dax ST CT Monkey Cub and Skyteam. Inner diameter of the rubber sleeve 33mm,...
€19.88Price
€9.87 Tax Included
8.22 Tax Excluded
Rubber intake pipe for Keihin PWK and Mikuni VM carburetors on Honda Dax ST50 ST70 CT50 CT70 Monkey Cub CRF and Skyteam and other replicas.
Center distance 46.5mm - 8mm offset
Fits BS0272 manifold
€9.87Price
€178.46 Tax Included
148.72 Tax Excluded
- New
- New
Set of injection body and ECU / CDI ROJO box + wiring for "Dax" Skyteam and Zhenhua City 50cc Euro 4 with injection.
Supplied with flanged manifold and original 30cc/min injector.
Not suitable for Euro 5 models.
€178.46Price
€84.25 Tax Included
70.21 Tax Excluded
- New
- New
Carburetor Nibbi PWK 24 racing 24YJ 4 stroke with adjustable power jet
jet type PE/PWK of 112
idle jet : 32
power jet : 28
diameter of the filter to foresee 50mm
diameter of the sleeve to be foreseen 35mm
€84.25Price
€39.17 Tax Included
32.64 Tax Excluded
- Online only
- Online only
Kitaco manifold rubber inlet sleeve for carburettor TDMR on DOHC Kitaco cylinder head. Inside diameter 36 mm, center distance 48 mm
€39.17Price
Keihin PE28 carburettor reviewed by Takegawa. Main jet of 128 and idle 52 mounted + supplied with another main 110 and idle of 35
€242.93Price
Intake pipe Keihin Kitaco for PC 20, with reduction in diameter to fit on the head Genuine Honda.
€48.10Price
Questions
Be the first to ask a question about this category!