- New
- New
Set of 4 M10 cap nuts, pitch 1.25 for shock absorber with 8 chrome washers
Compatible with Honda Dax Monkey and replicas, Camino etc.
€3.47Price
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
EQUIPMENT
Under EQUIPMENT you will find universal items, such as: Bulbs, batteries, spark plugs, helmets, chains, winkers, consumables, belts, clothing, air filters, headlights, taillights, levers, oils, greases, paints, mirrors, bearings as well as spare parts for meters, braking, electricity ...
Faites votre choix parmi ces catégories:
Active filters
Filter results
Led Bullets winkers, price for one piece, clear lens
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<a href="https://www.motorkit.com/en/winkers-with-led-or-bulb/1550-winkers-relay-for-led-2-pins-model.html" target="_blank" rel="noreferrer...
€9.91Price
Led Bullets winkers, price for one piece, smoke lens
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<a href="https://www.motorkit.com/en/winkers-with-led-or-bulb/1550-winkers-relay-for-led-2-pins-model.html" target="_blank" rel="noreferrer...
€15.82Price
- New
- New
Honda Nice flywheel puller and all Honda type engines with normal or reversed flywheel (Skyteam 125, Zongsheng starter, Lifan starter, etc ...)
On one side 27 left thread male
On the other 28 right thread female
€18.79Price
Pair of winkers drop chromed
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<span...
€9.90Price
Winkers relay for LED with 2 pins, 12V 1-10watt
€9.42Price
Clutch and rear pulley removal tool for Honda Camino hobbit
€35.65Price
Flywheel puller for Ducati ignition, 19x1, right - Am6 and Derbi engine (on Aprilia RS, Yamaha X Power, X Limit, Peugeot XP, Derbi Senda, GPR, Rieju..)
€7.44Price
Pair of winkers drop carbon look
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<span...
€9.87Price
flywheel puller universal : 2 bolts M6 from 30 to 50mm
€12.84Price
Kitaco rubber intake sleeve. Available for different carburetors: Mikuni VM / FL24, VM26 - Keihin PWK28 and FCR28. You will find the dimensions on the attached...
€24.78Price
Pair of Dax type 6volt indicators.
The quality of these reproductions is very good.
Only available in pairs (1x left + 1x right).
Supplied with 12 volt 10 watt bulb. The 6v bulbs can be purchased separately.
Available in orange or white. Diameter 41mm length 58mm
€23.75Price
Multi-position universal internal and external ignition rotor disassembly / tear tool
€21.77Price
€79.33 Tax Included
66.11 Tax Excluded
Hydraulic shockbreaker adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Color : white
Length: 330mm
Diameter of the fixing holes: 10 mm
Price for one...
€79.33Price
€7.44 Tax Included
6.20 Tax Excluded
Flywheel puller 27 mm x1, left thread for Honda, Yamaha, Suzuki, MBK, CPI, Skyteam
€7.44Price
- New
- New
6 leds small square winkers - blinkers set - black body - smoke lens
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<a href="https://www.motorkit.com/en/winkers-with-led-or-bulb/1550-winkers-relay-for-led-2-pins-model.html" target="_blank"...
€17.80Price
- New
- New
Set from 4 spacers to adapt shock holes from 12mm to 10mm diameter
€3.92Price
- New
- New
Winker - turn signal - Flashing light (1pc) oval CEV type with clear glas and orange bulb.
Right-hand or left-hand mounting
For Derbi - Rieju - RRX - MRX - RS - MH and other applications.
Total length: 95mm
EC approved
€9.42Price
spare part bracket for flashing Bullet. Price for 1pc.
<div...
€4.91Price
rear shocks no spring 330mm in blue
sold in pairs, upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use this chain guard from Kepspeed
€69.37Price
€11.95 Tax Included
9.96 Tax Excluded
12-way adapter for 26mm intake manifold allows you to choose the best carburetor position on your Honda or replica mini 4-stroke
€11.95Price
€4.91 Tax Included
4.09 Tax Excluded
Winkers / Blinker Relay - central flashers with 3 vertical plugs for Piaggio - Honda - Kymco Agility and certain Chinese scooters with GY6 engine.
alternative to the following original parts:
PIAGGIO: 292114
KYMCO:...
€4.91Price
€18.79 Tax Included
15.66 Tax Excluded
- New
- New
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
Takegawa ignition Flywheel puller for Honda MSX - GROM - Monkey 125 cc. Internal thread dimensions M30 × P1.50
€42.60Price
- New
- New
The Easyboost primary transmission gear lock for Derbi Euro 3 and 4 allows you to easily unscrew the primary transmission gear nut.
€18.84Price
Rear shock 330mm 6 roll spring black
sold in pairs, upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use this chain guard from Kepspeed
€62.43Price
€8.88 Tax Included
7.40 Tax Excluded
Flywheel puller - extractor for Bosch 26 x 1.5mm right, big model, for Kreidler Zundapp and Puch-Maxi
€8.88Price
winker lamp oval - leds transparent glass - by pair
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<a href="https://www.motorkit.com/en/winkers-with-led-or-bulb/1550-winkers-relay-for-led-2-pins-model.html" target="_blank" rel="noreferrer...
€12.84Price
Kitaco ignition Flywheel puller for Honda MSX - GROM - Monkey 125 cc. Internal thread dimensions M30 × P1.50
€24.74Price
Red/chrome 330mm LC shock absorbers adjustable in hardness, sold in a set of 2
Upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, modifications to the chain guard are sometimes necessary. You can also use ...
€44.58Price
- New
- New
Shockabsorbers set Takegawa 330mm red, adjustable spring load
12mm above fixation hole
10mm down fixation hole
€214.17Price
- New
- New
Pair of flashing light - blinkers Tube shaped 9 leds. Mounted on rubber - length (without fixing) 86 mm. EEC homologated.
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by : ...
€29.74Price
- New
- New
6 leds small square winkers - blinkers set - chrome body - clear lens
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<a href="https://www.motorkit.com/en/winkers-with-led-or-bulb/1550-winkers-relay-for-led-2-pins-model.html" target="_blank"...
€19.79Price
€158.63 Tax Included
132.19 Tax Excluded
- Pack
- Pack
Pair of hydraulic shockbreakers adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Color : white
Length: 330mm
Diameter of the fixing holes: 10 mm
Price for a...
€158.63Price
€79.33 Tax Included
66.11 Tax Excluded
Hydraulic shockbreaker adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Red color
Length: 330mm
Diameter of the fixing holes: 10 mm
Price for one piece
€79.33Price
- New
- New
Winker - turn signal - Flashing light (1pc) oval CEV type with smoked glas and orange bulb.
Right-hand or left-hand mounting
For Derbi - Rieju - RRX - MRX - RS - MH and other applications.
Total length: 95mm
EC approved
€9.42Price
- New
- New
Pair of winkers - blinkers Triangle 18 leds - carbon effect body - clear glass
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of original flashing relay by :
flashing relay for leds 2...
€21.77Price
€79.33 Tax Included
66.11 Tax Excluded
Hydraulic shockbreakers adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Color : Yellow
Length: 330mm
Diameter of the fixing holes: 10 mm
<span...
€79.33Price
290mm shock silver no springs Blue
sold in pairs, upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use this chain guard from Kepspeed
€69.37Price
Pair of winker Zenhua / Skyteam Dax with bracket homologated
€24.79Price
Pair of oleo-pneumatic shock absorbers, 330 mm center distance, black anodized, upper and lower eyelets for 10 mm bolts.
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use<a...
€69.37Price
Kepspeed winkers bracket aluminium L shaped set of 2 : 35 x 35mm thickness 3mm
2 oval holes : 6 x 12mm
€4.91Price
Collar set to fit Dax schock on Monkey.
12 ext 10 int.
€5.94Price
Winkers blinkers leds set Wind by Victoria Bull - black body - clear lens
ATTENTION: The installation of LEDS blinkers absolutely requires the replacement of orignal flashing relay by :
<a href="https://www.motorkit.com/en/winkers-with-led-or-bulb/1550-winkers-relay-for-led-2-pins-model.html"...
€16.36Price
Yellow and alu shock breaker / damper with gaz tank : They are adjustable in hardness and lenght ( center distance 330mm ). Delivered with spring key, eyelets 10 mm and 12 mm, rubbers
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use<a href="https://www.motorkit.com/en/accessories/10324-chainguard-aluminium-kepspeed-for-dax.html"...
€69.37Price
€18.79 Tax Included
15.66 Tax Excluded
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
Pair of 12 volt blinkers - turn signal "Spatial", in matt black metal: 2 LEDs at the front, 2 LEDs at the back, 2 side LEDs. Total length (with rod): 55 mm.
<span class="tlid-translation...
€21.77Price
Fly wheel puller 24mm x 1.5mm right Tomos Morini by Buzetti
€9.87Price
€27.67 Tax Included
23.06 Tax Excluded
Shock absorber / Damper for Honda Wallaroo 285 mm black or white
€27.67Price
Ignition puller Buzetti 2 screws 22-32mm for PVL Selectra HPI
€22.76Price
Oleo-pneumatic looking shock absorbers 330mm long.
Internal gas pocket pressure 2.5bars, internal spring for the ascent phase.
Colour: chrome, sold in pairs. Upper and lower eyelets for 10mm screws
Depending on your Dax or replica model, modifications to the chain guard may be necessary. You can also use this chain guard from Kepspeed
€69.37Price
Questions
Be the first to ask a question about this category!