Sticker monkey oval orange and chrome 45x25mm
€3.96Price
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
EQUIPMENT
Under EQUIPMENT you will find universal items, such as: Bulbs, batteries, spark plugs, helmets, chains, winkers, consumables, belts, clothing, air filters, headlights, taillights, levers, oils, greases, paints, mirrors, bearings as well as spare parts for meters, braking, electricity ...
Faites votre choix parmi ces catégories:
Active filters
Filter results
- New
- New
Set of 4 M10 cap nuts, pitch 1.25 for shock absorber with 8 chrome washers
Compatible with Honda Dax Monkey and replicas, Camino etc.
€3.47Price
Sticker Takegawa high octane.
size12mm x 30mm.
Price is for 1 sticker
€0.99Price
- New
- New
Honda Nice flywheel puller and all Honda type engines with normal or reversed flywheel (Skyteam 125, Zongsheng starter, Lifan starter, etc ...)
On one side 27 left thread male
On the other 28 right thread female
€18.79Price
- On sale!
- On sale!
Sticker for Honda C100 vintage "Made in Belgium" reproduction
Brushed aluminium decal - Dimension 20 x 50 mm
€9.91Price
Clutch and rear pulley removal tool for Honda Camino hobbit
€35.65Price
Sticker P50 Little Honda "Made in Belgium"
Brushed aluminium Decal - Dimension 20 x 50 mm
€9.91Price
- On sale!
- On sale!
Sticker Honda c110 "Made in Belgium"
Brushed aluminium decal - Dimension 20 x 50 mm
€8.88Price
Flywheel puller for Ducati ignition, 19x1, right - Am6 and Derbi engine (on Aprilia RS, Yamaha X Power, X Limit, Peugeot XP, Derbi Senda, GPR, Rieju..)
€7.44Price
flywheel puller universal : 2 bolts M6 from 30 to 50mm
€12.84Price
Kitaco rubber intake sleeve. Available for different carburetors: Mikuni VM / FL24, VM26 - Keihin PWK28 and FCR28. You will find the dimensions on the attached...
€24.78Price
Stickers set reproduction Honda S800 Chrome plated, price for 2 stickers
€14.83Price
Multi-position universal internal and external ignition rotor disassembly / tear tool
€21.77Price
Wheel rim stripe green 7mm 600cm with applicator 7mm wide wheel rim decals. Can also be used on other areas of bodywork. Delivery includes: 7mm wide roll of adhesive band. 6m roll is sufficient for both sides of wheels up to18 inches.
€6.89Price
€4.95 Tax Included
4.12 Tax Excluded
- New
- New
Support - Plastic license plate holder for new licence plates 10 x 12cm.
It is supplied with the 4 fastening screws
Suitable for European standards mopeds and mopeds.
with Motorkit logo
€4.95Price
Wheel rim stripe gold 7mm 600cm with applicator
7mm wide wheel rim decals. Can also be used on other areas of bodywork. Delivery includes: 7mm wide roll of adhesive band. 6m roll is sufficient for both sides of wheels up to18 inches.
€8.93Price
€79.33 Tax Included
66.11 Tax Excluded
Hydraulic shockbreaker adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Color : white
Length: 330mm
Diameter of the fixing holes: 10 mm
Price for one...
€79.33Price
€7.44 Tax Included
6.20 Tax Excluded
Flywheel puller 27 mm x1, left thread for Honda, Yamaha, Suzuki, MBK, CPI, Skyteam
€7.44Price
belgian plastic License plate support for scooters and motorbikes with or without Motorkit logo
140 x 210 mm
€0.00Price
- New
- New
Classic Honda sticker - aluminum (reproduction)
Dimensions: 78mm x 11mm
Price for 1 Pc.
€9.87Price
Set of Wings emblem - badge, left and right. Chrome on black or red, diameter 45mm
Product with small mistakes in paint and finishing .
€17.85Price
- New
- New
Black and white sticker for Leovince silencer
Dimensions: 100mm x 40mm
€5.90Price
- New
- New
Set from 4 spacers to adapt shock holes from 12mm to 10mm diameter
€3.92Price
Wheel rim stripe black 7mm 600cm with applicator
7mm wide wheel rim decals. Can also be used on other areas of bodywork. Delivery includes: 7mm wide roll of adhesive band. 6m roll is sufficient for both sides of wheels up to18 inches.
€7.93Price
rear shocks no spring 330mm in blue
sold in pairs, upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use this chain guard from Kepspeed
€69.37Price
€11.95 Tax Included
9.96 Tax Excluded
12-way adapter for 26mm intake manifold allows you to choose the best carburetor position on your Honda or replica mini 4-stroke
€11.95Price
Wheel rim stripe green 7mm 600cm with applicator
7mm wide wheel rim decals.
Can also be used on other areas of bodywork.
Delivery includes: 7mm wide roll of adhesive band. 6m roll is sufficient for both sides of wheels up to18 inches.
€7.93Price
€18.79 Tax Included
15.66 Tax Excluded
- New
- New
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
Set of 2 stickers Funny Dog Black for Dax 12v and chinese replica's.
Sold by pair.
€14.88Price
Takegawa ignition Flywheel puller for Honda MSX - GROM - Monkey 125 cc. Internal thread dimensions M30 × P1.50
€42.60Price
- New
- New
The Easyboost primary transmission gear lock for Derbi Euro 3 and 4 allows you to easily unscrew the primary transmission gear nut.
€18.84Price
Rear shock 330mm 6 roll spring black
sold in pairs, upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use this chain guard from Kepspeed
€62.43Price
Set of 6 Stickers TAKEGAWA.
2 x Small :100mm x 20mm
2 x Medium : 170mm x 42mm
2 x Large : 400m x 91mm
€16.86Price
€8.88 Tax Included
7.40 Tax Excluded
Flywheel puller - extractor for Bosch 26 x 1.5mm right, big model, for Kreidler Zundapp and Puch-Maxi
€8.88Price
Kitaco ignition Flywheel puller for Honda MSX - GROM - Monkey 125 cc. Internal thread dimensions M30 × P1.50
€24.74Price
Red/chrome 330mm LC shock absorbers adjustable in hardness, sold in a set of 2
Upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, modifications to the chain guard are sometimes necessary. You can also use ...
€44.58Price
- New
- New
Shockabsorbers set Takegawa 330mm red, adjustable spring load
12mm above fixation hole
10mm down fixation hole
€214.17Price
€158.63 Tax Included
132.19 Tax Excluded
- Pack
- Pack
Pair of hydraulic shockbreakers adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Color : white
Length: 330mm
Diameter of the fixing holes: 10 mm
Price for a...
€158.63Price
€79.33 Tax Included
66.11 Tax Excluded
Hydraulic shockbreaker adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Red color
Length: 330mm
Diameter of the fixing holes: 10 mm
Price for one piece
€79.33Price
€79.33 Tax Included
66.11 Tax Excluded
Hydraulic shockbreakers adjustable in hardness for Honda Monkey 125 cc from 2018 (JB02)
Brand: Kitaco
Color : Yellow
Length: 330mm
Diameter of the fixing holes: 10 mm
<span...
€79.33Price
€15.82 Tax Included
13.18 Tax Excluded
Set of 2 stickers Funny Dog Black - yellow for Dax 12v and chinese replica's.
Sold by pair.
€15.82Price
290mm shock silver no springs Blue
sold in pairs, upper and lower eyelets for 10mm screws
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use this chain guard from Kepspeed
€69.37Price
Pair of oleo-pneumatic shock absorbers, 330 mm center distance, black anodized, upper and lower eyelets for 10 mm bolts.
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use<a...
€69.37Price
Collar set to fit Dax schock on Monkey.
12 ext 10 int.
€5.94Price
Yellow and alu shock breaker / damper with gaz tank : They are adjustable in hardness and lenght ( center distance 330mm ). Delivered with spring key, eyelets 10 mm and 12 mm, rubbers
Depending on your model of Dax or replica, chain guard changes are sometimes necessary. You can also use<a href="https://www.motorkit.com/en/accessories/10324-chainguard-aluminium-kepspeed-for-dax.html"...
€69.37Price
€18.79 Tax Included
15.66 Tax Excluded
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
Fly wheel puller 24mm x 1.5mm right Tomos Morini by Buzetti
€9.87Price
€27.67 Tax Included
23.06 Tax Excluded
Shock absorber / Damper for Honda Wallaroo 285 mm black or white
€27.67Price
Ignition puller Buzetti 2 screws 22-32mm for PVL Selectra HPI
€22.76Price
Questions
Be the first to ask a question about this category!