Carburator Daytona Mikuni VM26 for mini 4 stroke - made in Japan
Main jet # 190 (4 / 042-190)
Idle jet # 22.5 (M28 / 1001-22.5)
Needle # J8-5E75
Bushel # 1.5 (VM26 / 361-1.5)
€118.02Price
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
PARTS & ACCESSORIES FOR SCOOTERS, MINI 4 STROKES
carburator, inlet pipe
Carburator parts for honda ZB R RT : airfilter, gasket, manifold , rubber
Filter results
Manifold gasket set for Dax - Monkey - Skyteam 26mm carburator and other mini four stroke
€3.92Price
Carburettor type PE with adjustments for 4 stroke engines. In 24 and 26 mm : delivered with round bushel, flexible assembly and choke by cable. In 20 and 28 mm with a manual choke. <span...
€59.50Price
€3.47 Tax Included
2.89 Tax Excluded
Carburator isolator and gaskets 18 / 20 mm for Dax - Monkey - Skyteam and other mini 4 stroke
€3.47Price
Manifold gasket set for Dax - Monkey - Skyteam 20mm carburator
€3.92Price
Kitaco rubber intake sleeve. Available for different carburetors: Mikuni VM / FL24, VM26 - Keihin PWK28 and FCR28. You will find the dimensions on the attached...
€24.78Price
Fit for anima manifold but also for all the other manifold pipe. You can put all manifold pipe with honda size like Kitaco, Takegawa,... .
OPUS Multiway attachement set, Special model for the Daytona Anima engines 150/190cc.
<p...
€39.66Price
€29.70 Tax Included
24.75 Tax Excluded
- New
- New
Shen Wei 26mm carburettor for Dax - Monkey and replicas.
For 36mm air filter.
The bore is oval for the PZ type carburettor, so the dimensions are 20mm wide and 26mm high.
2 M6 mounting screws spaced 48mm apart
Total length of 68mm
€29.70Price
- New
- New
Complete Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Consists of a multi-positionable intake manifold, a sleeve, a PE24 carburetor and an inclined air filter - foam (diameter: 90mm - length: 75mm)
Main jet type DO 5mm: 105mm
PE / PWK idle jet: 40mm
€109.04Price
€6.89 Tax Included
5.74 Tax Excluded
Carburetor O-ring / sealing set for Honda Dax ST50 ST70 CT50 CT70 Cub 12 Volts (NT) and CRF50 CRF70 XR - ZB Monkey-R.
Reproduction parts.
€6.89Price
€4.91 Tax Included
4.09 Tax Excluded
Intake manifold flange "speed killer" - center diameter 8 mm, center distance 45 mm, easy installation / removal for Honda Dax ST CT Monkey Gorilla Cub ZB CRF and Skyteam Singa and other derivatives.
€4.91Price
Air Filter Oval Tapered Takegawa 42mm. Compatible for carburators : - PB 18-PD 22 - VM 22 - VM 24 - VM 26 It's have a entrance for a vent motor.
€29.75Price
Mikuni VM 26mm carburettor 4Stroke, pre-set by KITACO.
It is equipped with a round treated bushel with a # 1.5 cut, a main jet of 150, idle 15 and a 4J13-2 needle.
...
€138.79Price
Manifold gasket set Dax - Monkey - Skyteam and othter mini four stroke for 22mm carburator
€3.92Price
- New
- New
Nibbi PZ14mm carburettor without fuel tap for 50cc 4 stroke mini. Air filter inlet 30mm, section 12.5mm, mounting flange 38mm 2 x M6.
Main jet: 55 Gurtner type
Idle jet 35 type keihin PC
€37.64Price
€11.95 Tax Included
9.96 Tax Excluded
12-way adapter for 26mm intake manifold allows you to choose the best carburetor position on your Honda or replica mini 4-stroke
€11.95Price
€18.79 Tax Included
15.66 Tax Excluded
- New
- New
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
Shift-UP intake rubber sleeve for Keihin PE22 PE24 carburetor. Inside diameter: 33 mm on one side, 30 mm on the other.
€14.87Price
Carburator needle for Keihin PWK 33mm, W956R_1171N model by Daytona
€15.82Price
€45.57 Tax Included
37.98 Tax Excluded
- New
- New
Trail-Bike short intake pipe - left side for 20mm carburetors 48mm center distance.
Supplied with insulator, gaskets, screws and tightening...
€45.57Price
Air Filter Oval Tapered Takegawa 49mm. Compatible for carburators : - PE 28 - PWK 28 It's have a entrance for a vent motor.
€29.75Price
€18.79 Tax Included
15.66 Tax Excluded
flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua
€18.79Price
Idle - Stationary screw for carburateur Keihin PC18 / 20 by Takegawa. CNC alu black or silver
€19.79Price
Air Filter Oval Tapered Takegawa 46mm. Compatible for carburators : - PE 20 - PE 22 - PE 24 It's have a entrance for a vent motor.
€29.75Price
€94.17 Tax Included
78.47 Tax Excluded
Carburetor kit Kei PE 28mm.
Special for Zongshen / Daytona Anima and fit on Dax / Monkey
It consists of an intake pipe (ZS / Anima center distance) with its sleeve, the 28mm PE carburettor and a double foam air filter.
Ø118 main jet
Ø40 idle jet
€94.17Price
€39.17 Tax Included
32.64 Tax Excluded
- Online only
- Online only
Kitaco manifold rubber inlet sleeve for carburettor TDMR on DOHC Kitaco cylinder head. Inside diameter 36 mm, center distance 48 mm
€39.17Price
Keihin PE28 carburettor reviewed by Takegawa. Main jet of 128 and idle 52 mounted + supplied with another main 110 and idle of 35
€242.93Price
€59.45 Tax Included
49.55 Tax Excluded
- New
- New
Nibbi PE19mm carburettor with polished finish flange fixing for 4-stroke engines: Dax - Monkey - Cub and replicas Skyteam -Skymax - Zhenhua - Singa.
Requires 50mm diameter air filter.
DO 5mm main jet: 98
PE/PWK type idle nozzle: 32
48mm flange between axles, 2 M6 screws
€59.45Price
- New
- New
Nibbi 17mm carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Main jet type DO 5mm: 105mm
PE / PWK idle jet: 40mm
Requires a 45mm diameter air filter and a 30mm diameter inlet sleeve. ...
€59.45Price
- New
- New
Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Main jet type DO 5mm: 105mm
PE / PWK idle jet: 40mm
Requires a 45mm diameter air filter and a 30mm diameter inlet sleeve.
<span...
€59.45Price
- New
- New
Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Main jet type DO 5mm: 105mm
PE / PWK idle jet: 40mm
Requires a 45mm diameter air filter and a 30mm diameter inlet sleeve.
<span...
€59.45Price
- New
- New
JK PE 22mm venturi 24mm carburettor kit for Honda Dax Monkey Cub and Skyteam and other copies
- .96 main jet type 5mm
- .32 keihin pwk idle jet
- 38mm air filter inlet
- flange mounting: 2 x 6mm screws 48mm apart, 7mm offset
Inlet pipe and double foam filter supplied.
€55.49Price
€74.33 Tax Included
61.94 Tax Excluded
- New
- New
PE28 carburetor kit, 28mm special diameter for Zongshen190 and Daytona Anima 190 engine
It consists of...
€74.33Price
- New
- New
Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Main jet type DO 5mm: 105mm
PE / PWK idle jet: 40mm
Requires a 45mm diameter air filter and a 30mm diameter inlet sleeve.
<span...
€58.46Price
- New
- New
Complete Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Consists of a multi-positionable intake manifold, a sleeve, a PE28 carburetor and an inclined air filter - foam (diameter: 90mm - length: 75mm)
Main jet type DO 5mm: 120
PE / PWK idle jet: 40
€114.99Price
- New
- New
Complete Nibbi carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Consists of a multi-positionable intake manifold, a sleeve, a PE26 carburetor and an inclined air filter - foam (diameter: 90mm - length: 75mm)
Main jet type DO 5mm: 110mm
PE / PWK idle jet: 40mm
€114.00Price
- New
- New
Nibbi 17mm carburetor set for 4 Stroke engines: Dax - Monkey - Cub and Skyteam -Skymax - Zhenhua - Singa ...
Main jet type DO 5mm: 105mm
PE / PWK idle jet: 40mm
Requires a 45mm diameter air filter and a 30mm diameter inlet sleeve.
<span...
€49.54Price
€69.37 Tax Included
57.81 Tax Excluded
- New
- New
Carburetor kit Nibbi PWK 24 SP racing 4 stroke with adjustable power jet
jet type PE/PWK of 112
idle jet : 32
power jet : 28
diameter of the filter to foresee 50mm
diameter of the sleeve to be foreseen 35mm
€69.37Price
- New
- New
Nibbi PE 24mm carburettor flange mount for 4 stroke engines : Dax - Monkey - Cub and replicas Skyteam -Skymax - Zhenhua - Singa.
Main jet type DO 5mm : 105
Idle jet type PE/PWK : 40
Requires a 50mm diameter air filter
48mm flange between axis, 2 M6 screws
€59.45Price
- New
- New
Nibbi PE28mm carburettor flange mount for 4 stroke engines : Dax - Monkey - Cub and replicas Skyteam -Skymax - Zhenhua - Singa.
Main jet type DO 5mm : 112
Idle jet type PE/PWK : 40
Requires a 50mm diameter air filter
48mm flange between axis, 2 M6 screws
€59.45Price
- New
- New
JK PE 22mm bare carburettor venturized 24mm for Honda Dax Monkey Gorilla and copies
.96 main jet type 5mm
.32 keihin PWK idle jet
38mm air filter inlet
flange mounting: 2 x 6mm screws at 48mm centres, 7mm offset
€44.58Price
€29.70 Tax Included
24.75 Tax Excluded
- New
- New
16mm PZ19 carburettor for Dax / Monkey / Skyteam.
The carburetor is...
€29.70Price
€49.54 Tax Included
41.28 Tax Excluded
- New
- New
Nibbi PE22mm flange-mount carburettor for 4-stroke engines: Dax - Monkey - Cub and replicas Skyteam -Skymax - Zhenhua - Singa.
DO 5mm main nozzle: 98
PE/PWK idle nozzle: 32
Requires 50mm diameter air filter
48mm flange between axles, 2 M6 screws
€49.54Price
- New
- New
Nibbi PWK 34mm racing carburettor with Power Jet for 4 stroke engines
- black anodized body
- Tank with quick access to the main jet
- Chrome plated gas slider
- main jet : 120
- idle jet : 32
- intake pipe diameter: 40mm
- air filter diameter: 54mm
- intake pipe diameter: 40mm
- air filter diameter: 54mm
- Power jet: 28
€118.96Price
- New
- New
Nibbi PWK 34mm racing carburettor with Power Jet for 4 stroke engines
- black anodized body
- Tank with quick access to the main jet
- Chrome plated gas slider
- main jet : 132
- idle jet : 32
- Power jet: 28
- intake pipe diameter: 40mm
- air filter diameter: 54mm
€118.96Price
€32.68 Tax Included
27.23 Tax Excluded
Carburetor O-ring gasket set for Honda Dax ST50 ST50 CT50 CT70 12 Volts NT and CRF50 CRF70 XR - ZB Monkey-R. Genuine part
€32.68Price
Takegawa aluminium intake pipe for Keihin PD22 carburettor for Honda Dax and replicas
It is delivered with a fuel tap and the necessary screws.
€89.21Price
€105.07 Tax Included
87.56 Tax Excluded
Multiangle Manifold kit Takegawa for Mikuni VM26 / Keihin PE28
€105.07Price
Multiway Opus for Takegawa DOHC / Desmo cylinderhead
€45.61Price
Air filter cover Takegawa.
Fit directly to air filter Takegawa Oval tapered and round taper.
€21.72Price
€79.34 Tax Included
66.12 Tax Excluded
Kitaco aluminum intake pipe + sleeve for Mikuni carburetor VM26mm. Complete kit comes with gaskets and screws for Honda Dax ST CT Cub Monkey 6 and 12 Volt ZB CRF and Skyteam TNT Skymax City Singa Zhenhua and other...
€79.34Price
- New
- New
Nibbi PE28mm carburettor flange mount for 4 stroke engines : Dax - Monkey - Cub and replicas Skyteam -Skymax - Zhenhua - Singa.
Main jet type DO 5mm : 112
Idle jet type PE/PWK : 40
Requires a 50mm diameter air filter
48mm flange between axis, 2 M6 screws
€49.54Price
- New
- New
Nibbi PWK 34mm racing carburettor with Power Jet for 4 stroke engines
- black anodized body
- Tank with quick access to the main jet
- Chrome plated gas slider
- main jet : 128
- idle jet : 32
- intake pipe diameter: 40mm
- air filter diameter: 54mm
- Power jet: 28
€118.96Price
- New
- New
Nibbi PE19mm carburettor flange mount for 4 stroke engines : Dax - Monkey - Cub and replicas Skyteam -Skymax - Zhenhua - Singa.
Main jet type DO 5mm : 98
Idle jet type PE/PWK : 32
Requires a 50mm diameter air filter
48mm flange between axis, 2 M6 screws
€59.45Price
Air filter 42 mm two different densities of superimposed foam with internal holding spring. Carburetor Diameter: 42 mm, Diameter Foam: 89 mm, Foam Length: 78 mm - Trail Bike
€25.74Price
Kitaco aluminium mounting Venturi for TDMR32 carburetor. Ins. diam. 32 mm, out. diam. 38 mm, thread diam. 37 mm
€29.74Price
Questions
Be the first to ask a question about this category!