Honda Injector O-ring Type B 6.3 x 2.2mm Original part

Yuminashi timing chain tensioner end cap - reinforced - in brass for Honda MSX125 - Grom125 - Monkey125 - Dax 125 cc.

Timing chain guide located in the cylinder, reinforced for Honda MSX125 - GROM125 jC61, JC75, JC92 - Monkey125 JB02, JB03 - DAX125 JB04. Made in Ertalon by Yuminashi, it will replace the original rubber one.

Keihin Yuminashi injector of flow 170cc/min type B "5ED3" 8 holes Recommended for engines from 145cc to 165cc. This injector is B type, which means that this type of injector is ready to be installed in many new generation motorcycles like MSX/GROM125, Z125 MONKEY, CB125R, CB125F, FORZA125, PCX125 eSP (V2 & V3), PCX150, SH125i & SH150i ABS, AIR BLADE 125i eSP, new...

Yuminashi Honda MSX/Monkey 125cc timing chain tensioner kit consisting of a reinforced arm + the tappet and its bronze end cap. The wheel of this heavy duty/heavy duty cam chain tensioner set is made of a high quality durable material and the racing edition button is made of brass. Please keep in mind that the racing edition will make more noise compared to the street edition...

Manual timing chain tensioner Blue Yuminashi Honda MSX/Monkey 125cc This manual timing chain adjuster allows you to manually adjust the pressure on the timing chain. This system dates back to the early years of Honda when all bikes were equipped with such a manual cam chain system. The absolute advantage of this system is that you have total control over the tensioner...

Set of copper cylinder head gasket and standard base for Yuminashi 140cc light kit Monkey125 JB03 and DAX125 JB04.

Honda Square Injector O-ring 11.5 x 3.3mm Original parts

Manual timing chain tensioner Red Yuminashi Honda MSX/Monkey 125cc This manual timing chain adjuster allows you to manually adjust the pressure on the timing chain. This system dates back to the early years of Honda when all bikes were equipped with such a manual cam chain system. The absolute advantage of this system is that you have total control over the tensioner...

Yuminashi SS241 Camshaft for Honda MSX - GROM125 JC92 - Monkey125 JB03 - ST Dax125 JB04 - Super Cub125 (JA14E) ● The YUMINASHI 241 degree SS241 camshaft has been designed for use in stock and large bore/large valve engines to bring your 110cc or 125cc Euro-5 engine to life. Once installed, you'll get the extra oxygen your engine needs to make powerful pulls from mid to top revs. ...

Yuminashi Honda MSX/Monkey/PCX 125cc progressive valve spring kit This double progressive valve spring set is derived from Yuminashi SP200R racing engine experience with a balanced spring pressure rate to avoid cam lobe damage as much as possible and allow the maximum rpm to be raised up to 14,000RPM without any problems. This set comes complete with 2 outer springs, 2 inner...

Gasket set for Yuminashi 140cc Monkey125 JB03 and DAX125 JB04 light kit.

Upgraded Yuminashi throttle body kit: 30mm with 3-pin connector. Suitable for Honda : MSX125 / GROM 125 (2013- ) MSX125 SF / GROM125 SF (2016- ) Monkey 125 JB02 Kit includes 1 x 3-PIN KEIHIN THROTTLE POSITION SENSOR connection (16060-K26-900) 1 x 30MM injection body 1 x Stainless steel gas cable holder 16169-KWN-000 1 x B-TYPE injector...

Yuminashi EVO 240° camshaft for Honda MSX - Grom 125 JC 61 and JC75 -- Monkey125 JB02 - SUPER CUB 125 It has been developed to produce a harmonious blend of torque and power throughout the rev range, with a valve overlap of 30. This is the perfect camshaft to select if you want to install a set of large valves in a narrow-space cylinder head. With the Yuminashi 240° camshaft,...

Yuminashi 140cc light kit Monkey125 JB03 and DAX125 JB04. Includes 1 cylinder in 53mm and complete high compression piston, gasket pocket and 14 tooth type 420 front sprocket. 50 x 63.1mm stroke To be fitted with the original cylinder head and camshaft. To be fitted with a minimum 155 and maximum 170cc/min injector

This adjustable camshaft sprocket is suitable for Honda CRF110F, MSX/GROM125 & SF, Z125 Monkey, C50, C110, C125 Super Cub, CT125 Hunter Cub, etc It replaces the original sprocket reference 14321-KYY-900 and 14321-KYZ-900. Stronger than these references it allows to adjust from more or less 2 to 2,5 degrees of advance/delay on the timing of the original camshaft.

Yuminashi Racing ECU for Honda MSX JC61 from 2013 Replaces OEM part number #38770-K26-901 Once you have installed the ECU, there are 3 things you should keep in mind: - There is a chance that your bike will not work properly the first time you start it: The ECU is capable of adjusting the fuel settings and ignition tables itself as you ride to provide accurate and...

Yuminashi piston kit - High compression - diameter 53mm for light kit Honda Monkey 125cc JB03 and Dax 125cc JB04.

Yuminashi 140cc 4-valve top end kit for Honda Nice and Wave 110 / XRM100 / XRM110 / REVO100/110 / etc... This Big Bore 56mm ( 50 x 55.5mm = Original Bore x Stroke) kit, so 137cc real, includes the 4 valve cylinder head, piston, racing camshaft, seals and everything you need to fit the kit to an STD stroke crankshaft. ※ The crankcase diameter needs to be enlarged to fit the 56mm...

Yuminashi Keihin type B injector holder for Honda MSX - Monkey - DAx 125cc