Carburateur 18mm MT/MB/MTX, montage direct sur la pipe origine.Gicleur principal de 97.5mm. Réplique  

Carburetor type Mikuni VM 24 flange model (spacing 50 mm) for 2 stroke like Honda NSR - MBX - Yamaha DT - RD....for air filter diam. 43 mm

Carburator 19,5mm  Dellorto PHBG réplica , main jet typ 5mm for cable starter. The air and idle screws settings are located on the left side

Carburator 21 mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side For aluminium manifold, outside diameter : 24 mm It is sold with a 1/4 turn manual choke system. It is designed for a 28 mm diameter air filter, but thanks to its threaded support, it can be fitted with a suction funnel that will allow all 48...

Gas top cover for Honda MT5 MB5 18mm original or replica carburetor . <div...

Carburetor type Mikuni VM 20 flange model (spacing 50 mm) for 2 stroke like Honda NSR - MBX - Yamaha DT - RD....for air filter diam. 43 mm

Carburator Polini CP 19 mm female, hand choke on carbu. dimensions : Inlet inner diameter : 24 mm  air filter diameter : 46 mm

Repair kit for carburator 18mm Honda Mb / MT

Keihin carburettor overhaul / repair set for Honda NSR - MBX - MT - MB - MTX 50cc

Polini CP carburettor in diameter 19mm with puller choke (right side location) with tips for oil and depression (+ plugs in case of not use). <span...

Polini CP carburettor in diameter 21mm with puller choke (right side location) with tips for oil and depression (+...

Carburator 17,5mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side. For aluminium manifold, outside diameter : 24 mm