Carbon racing reedvalve slat for Honda Wallaroo and Peugeot Fox - Speedfight - Vivacity - Buxy as well as any Peugeot 50cc 2-stroke scooter with vertical engine.
Thickness 0.35mm.
The composition, the sealing, the elasticity and the thickness of the intake valve blades have a major influence on the behaviour of the 2-stroke engine. In general, the thickness of these blades is...
Carbon racing reedvalve slat for Honda Wallaroo and Peugeot Fox - Speedfight - Vivacity - Buxy as well as any Peugeot 50cc 2-stroke scooter with vertical engine.
Thickness 0.35mm.
The composition, the sealing, the elasticity and the thickness of the intake valve blades have a major influence on the behaviour of the 2-stroke engine. In general, the thickness of these blades is...
Polini Carbon reed valves for Honda Wallaroo, Peugeot FOX, Buxy, Speedfight 1 en 2, TKR, Squab..
Blue = 0.30 mm (for standard cylinder)
Green = 0.35 mm (for sporting cylinder)
Polini Carbon reed valves for Honda Wallaroo, Peugeot FOX, Buxy, Speedfight 1 en 2, TKR, Squab..
Blue = 0.30 mm (for standard cylinder)
Green = 0.35 mm (for sporting cylinder)
Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 75 till 98.
75/78/80/82/85/88/90/92/95/98
Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 54 till 72.
54/56/58/60/62/64/66/68/70/72
Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 75 till 98.
75/78/80/82/85/88/90/92/95/98
Mainjet kit for Gurtner-keihin carburator. Kit of 10 mainjets from 54 till 72.
54/56/58/60/62/64/66/68/70/72
Pair of front footrest rubbers for Honda Dax ST50 ST70 CT50 CT70 12V Cub Monkey ZB CRF Skyteam and others. Thick model with guide on the bottom. Also suitable for Peugeot Fox and Honda Wallaroo.
Pair of front footrest rubbers for Honda Dax ST50 ST70 CT50 CT70 12V Cub Monkey ZB CRF Skyteam and others. Thick model with guide on the bottom. Also suitable for Peugeot Fox and Honda Wallaroo.
Fuel float needle for Gurtner carburetor 14 mm (standard) for Peugeot Speedfight, Vivacity, Buxy, Trekker, Squab, Fox ..- Kymco Super8, Super9, Top Boy, Agility ... 2 stroke and Honda Wallaroo.
Fuel float needle for Gurtner carburetor 14 mm (standard) for Peugeot Speedfight, Vivacity, Buxy, Trekker, Squab, Fox ..- Kymco Super8, Super9, Top Boy, Agility ... 2 stroke and Honda Wallaroo.
Carburator 21 mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side
For aluminium manifold, outside diameter : 24 mm
It is sold with a 1/4 turn manual choke system. It is designed for a 28 mm diameter air filter, but thanks to its threaded support, it can be fitted with a suction funnel that will allow all 48...
Carburator 21 mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side
For aluminium manifold, outside diameter : 24 mm
It is sold with a 1/4 turn manual choke system. It is designed for a 28 mm diameter air filter, but thanks to its threaded support, it can be fitted with a suction funnel that will allow all 48...
6V and 12V capacitor (80 x 44 x 24) to remove the battery.
Operating only on direct current (DC), it makes it possible to use flashing and horn functions (no electric...
6V and 12V capacitor (80 x 44 x 24) to remove the battery.
Operating only on direct current (DC), it makes it possible to use flashing and horn functions (no electric...
Air filter type K&N for Wallaroo. Suitable on Dellorto PHBG
Fixing diameter 28mm, sleeve length 65mm, total length 113mm, external filter diameter 61 / 51mm
Air filter type K&N for Wallaroo. Suitable on Dellorto PHBG
Fixing diameter 28mm, sleeve length 65mm, total length 113mm, external filter diameter 61 / 51mm
Dellorto PHBG 19 mm rigid carburetor - left adjustments
The air and idle screws are located on the left side (particularly useful in the case of Honda Wallaroo) and it is designed to be mounted on an aluminum intake pipe with an outside diameter of 24 mm.
It is sold with a manual pull-tab choke system, but this can be replaced in a jiffy by a <a...
Dellorto PHBG 19 mm rigid carburetor - left adjustments
The air and idle screws are located on the left side (particularly useful in the case of Honda Wallaroo) and it is designed to be mounted on an aluminum intake pipe with an outside diameter of 24 mm.
It is sold with a manual pull-tab choke system, but this can be replaced in a jiffy by a <a...