Carburator 19,5mm  Dellorto PHBG réplica , main jet typ 5mm for cable starter. The air and idle screws settings are located on the left side

Dellorto SHA 15 / 15 carburettor. The true and authentic SHA classic in a 15mm version. Suitable for most Peugeot 103, Puch maxi and MBK 51 mopeds, as well as Chinese pocket bikes. An adapted inlet pipe will be required in all cases. Main jet: 68 slider: Flat plastic Filter connection diameter: 59mm Pipe connection diameter: 19mm Tank: Plastic ...

Carburettor type Dellorto SHA 15 with manual choke and air / idle settings right side for intake manifold OD. 19mm . Supplied with air...

Dellorto carburator PHBG 19,5 mm female for cable choke / starter adjustable screws on right side

Dellorto PHBG 19 mm rigid carburetor - left adjustments The air and idle screws are located on the left side (particularly useful in the case of Honda Wallaroo) and it is designed to be mounted on an aluminum intake pipe with an outside diameter of 24 mm. It is sold with a manual pull-tab choke system, but this can be replaced in a jiffy by a <a...

Carburator SHA 14/12 Rigid mounting (interlocking of Ø18mm) without separate lubrication with the choke lever.

Carburator SHA 15mm

Carburator 17.5mm PHBG to fit on alloy manifold 24mm diameter

Carbu Type Dellorto SHA 16/16. With integrated air filter, easily accessible cable choke for intake manifold outer diameter: 19 mm. <div class="tlid-result-transliteration-container result-transliteration-container...

Carburator Polini CP 19 mm female, hand choke on carbu. dimensions : Inlet inner diameter : 24 mm  air filter diameter : 46 mm

Carburetor Peugeot 103 SPX / RCX

Carburator Polini CP 17.5mm ♀

Carburator 21 mm  Dellorto PHBG , main jet typ 5mm For aluminium manifold, outside diameter : 24 mm

Carburator kit Polini CP 19mm Peugeot 103

Carburator Polini CP 21mm ♀ Calibrations : Main Jet 72 Low Jet 42 Needle 14/22 Valve 24x30 Atomizer Bush d.2,7

Dellorto SHA 16/16 carburettor with manual choke and idle screw on the right side. With complete air filter For intake manifold with external diameter of 19mm. Recommended for Peugeot 103, MBK51, Puch Maxi and other 2-stroke mopeds.

Carburator 17,5mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side. For aluminium manifold, outside diameter : 24 mm