MOTORKIT graduated oil measuring bottle For quick and easy 2-stroke mixing.

Inlet reed vavle gasket Peugeot 103 SP / MVL / Vogue / RCX / SPX  

Carburator 19,5mm  Dellorto PHBG réplica , main jet typ 5mm for cable starter. The air and idle screws settings are located on the left side

Dellorto SHA 15 / 15 carburettor. The true and authentic SHA classic in a 15mm version. Suitable for most Peugeot 103, Puch maxi and MBK 51 mopeds, as well as Chinese pocket bikes. An adapted inlet pipe will be required in all cases. Main jet: 68 slider: Flat plastic Filter connection diameter: 59mm Pipe connection diameter: 19mm Tank: Plastic ...

Carburettor type Dellorto SHA 15 with manual choke and air / idle settings right side for intake manifold OD. 19mm . Supplied with air...

Air box racing Polini Peugeot 103 for carburator CP

Manifold - Inlet pipe for Peugeot 103 SPX / RCX / Vogue new model (with 16" wheels) for carburetor  Dellorto SHA Ø15mm and Gurtner standard

Dellorto carburator PHBG 19,5 mm female for cable choke / starter adjustable screws on right side

Dellorto PHBG 19 mm rigid carburetor - left adjustments The air and idle screws are located on the left side (particularly useful in the case of Honda Wallaroo) and it is designed to be mounted on an aluminum intake pipe with an outside diameter of 24 mm. It is sold with a manual pull-tab choke system, but this can be replaced in a jiffy by a <a...

Main Jet : 54 for Peugeot 103 SP - Vogue - MVL original carburetor. M5 x 0.75 11mm long without head and 4mm of head   Please...

Main Jet : 56 for Peugeot 103 SP - Vogue - MVL original carburetor. M5 x 0.75 11mm long without head and 4mm of head   Please...

Manifold - Inlet pipe Polini Peugeot 103 SPX - RCX  - Vogue new model (with 16" wheels) for carburetor Dellorto PHBG  or Polini CP from 17.5 to 21 mm

Carburator SHA 14/12 Rigid mounting (interlocking of Ø18mm) without separate lubrication with the choke lever.

Carburator SHA 15mm

Carburator 17.5mm PHBG to fit on alloy manifold 24mm diameter

Main Jet : 52 for Peugeot 103 SP - Vogue - MVL original carburetor. M5 x 0.75 11mm long without head and 4mm of head   Please...

Carbu Type Dellorto SHA 16/16. With integrated air filter, easily accessible cable choke for intake manifold outer diameter: 19 mm. <div class="tlid-result-transliteration-container result-transliteration-container...

Carburator tank Malossi fast and clear for Dellorto SHA. supplied with gasket and plug

Carburator Polini CP 19 mm female, hand choke on carbu. dimensions : Inlet inner diameter : 24 mm  air filter diameter : 46 mm

Carburetor Peugeot 103 SPX / RCX

Carburator Polini CP 17.5mm ♀

Malossi carbon reed valves for Peugeot  103 SP, SPX , RCX

Carburator 21 mm  Dellorto PHBG , main jet typ 5mm For aluminium manifold, outside diameter : 24 mm

Malossi reed valve box for Peugeot 103 SPX - RCX equipped with a Dellorto PHBG 17 - 19 or 21 mm carburettor. It consists of an external box to be fitted on the crankcases, a double-sided reed valve box with 0.30 mm thick carbon louvres, an intake manifold with an external diameter of 24 mm and the gaskets and nuts and bolts required for fitting. This kit allows the engine to be...

Doppler Open 3D - short flexible inlet manifold for Peugeot 103 RCX - SPX. Supplied with a 24mm diameter sleeve, it allows the fitting of a Dellorto PHBG carburettor from 17 to 21mm or a Polini CP from 17 to 23mm. WARNING: the material used is sensitive to tightening, so it is essential not to exceed the tightening torque (4Nm), and not to forget to use the washers supplied. In...

Manifold - Inlet pipe for Peugeot 103 SPX / RCX / Vogue new model (with 16" wheels) for carburetor  Dellorto SHA Ø15mm and Gurtner standard

Carburetor Polini CP Evolution 19mm male (carburetor enter the manifold), ext. diam.  29mm , filter fixing 46mm or  61mm with Polini funnel included in the pack.

Carburator kit Polini CP 19mm Peugeot 103

Carburator Polini CP 21mm ♀ Calibrations : Main Jet 72 Low Jet 42 Needle 14/22 Valve 24x30 Atomizer Bush d.2,7

Dellorto SHA 16/16 carburettor with manual choke and idle screw on the right side. With complete air filter For intake manifold with external diameter of 19mm. Recommended for Peugeot 103, MBK51, Puch Maxi and other 2-stroke mopeds.

Carburator 17,5mm Dellorto PHBG réplica, main jet typ 5mm The air and idle screws settings are located on the right side. For aluminium manifold, outside diameter : 24 mm

Reedvalve Polini for Peugeot 103