Kick starter chrome plated Ø16mm for YX engine

Kick starter pedal for YX motors - diameter 14mm. Available in chrome or black

Racing grip Kitaco type TZ

Pair of cnc anodized aluminium foot pegs / footrest  Grenade look. For Dax Skyteam Skymax City TNT Zenhua Beati Spigaou - Monkey - Cub -.. Available in : black, gold, blue and red With axles, springs and clips Size. 110mm lenght, 30mm diameter

Brake adjust screw star by Takegawa M6 P1

Chromed steel kick start pedal / lever " Flat-rear" Ø14mm for 13mm axle.   For Dax, Monkey, Cub and Skyteam, Zhenhua and other replica's. ...

Handlebar clamp black Kepspeed

Transmission cable for clutch at the front of the engine, length 800 mm with center adjustment and red d housing Dax Monkey Skyteam and other mini 4-stroke. By Kitaco

PBR Fuel Tap

Kitaco rear brake pedal axle end decorative cap, for Dax Monkey Gorilla Chaly and Skyteam. Only suitable for 14 mm axes. Anodized aluminum, 6 different colors

Offset chrome side stand, specially designed for double exhausts and left passage ... adjustable from 21 to 23cm <div class="tw-ta-container...

Brake adjust screw red by Takegawa

Brake adjust screw 2-point by Takegawa?

Universal kill switch witch starter switch Vicma

Cub type kick arm - slightly offset for Honda Dax Monkey Chaly Gorila and Skyteam Singa . For 13 mm axle

Gear shift CNC black 

Oil level gauge - CNC - short for Honda and replica engines SKyteam, Lifan, Zhenhua, Loncin etc in 50 and 70cc. In natural or black anodised aluminium With N.G.U. engraving on top

Silver anodized aluminum CNC shift pedal - adjustable in length to 25mm. Adaptable to Honda Dax Monkey ST50 ST70 CT50 CT70 Gorilla Chaly and Skyteam TNT City Skymax Zhenhua Singa Bongo Skymini and other replicas.

Pair of natural aluminium TIP-Hole front footrests with black anodised end caps for Honda Dax Monkey and Skyteam Skymax Zhenhu Singa TNT City and other replicas.

Pair of natural aluminium TIP-Strip front footrests with black anodised end caps for Honda Dax Monkey and Skyteam Skymax Zhenhu Singa TNT City and other replicas.

NGU footrest aluminium colour for Dax - Monkey - Skyteam - City - black anodized - folding model. Outside diameter 32mm Total length 120mm Milled notch of 11mm 4 o'rings are placed on the round part to prevent the foot from sliding. 2 decorative caps are supplied as an option

Combined including the two footrest (folding), a side stand with its support and the center stand. Suitable for Honda Dax ST50 ST70 CT50 CT 70, Gorilla, Chaly and Skyteam, TNT City, Zenhua, Jincheng, Singa and other replicas.

Side stand - CNC look - adjustable in length from 210 to 260 mm. For Honda Dax ST CT Chaly Monkey and replicas

Footrest Grenade Dax - Monkey - Skyteam - City - to be nested - silver anodized - not foldable. Inside diameter 15mm Outside diameter 27mm Total length 100mm

Footrest Grenade Dax - Monkey - Skyteam - City - to be nested - black anodized - not foldable. Inside diameter 15mm Outside diameter 27mm Total length 100mm

Racing grip Takegawa

This CDI unit will prevent your 50cc mini-bike with electronic ignition from exceeding the speed of 45 Km / hour. ATTENTION, before ordering, please check the compatibility of this CDI with your machine (type AC-DC, year of manufacture, connections, type of intake : carburettor...

Pair of adjustable CNC universal levers in anodised aluminium: silver levers - black supports - red adjustment knob. One hydraulic side with 10-pitch 125 threading and the other side designed for an M8 cable tensioner (not supplied). 12.5 mm pistons

Universal electric starter push button to place on the handlebars. OEM

Set of bar clams for standard handlebars (22mm) in billet black anodized aluminum. Height: 50mm - Height given from the base to the middle of the...

Throttle universel for Honda gaz cable

Blue LED speedometer / Km travelled and rev counter - diameter 60mm - black casing - with stand. For Honda Dax ST - Monkey and Skyteam - Singa - Skymax replicas... Meter function with original cable, KM/h or MPH, ratio 1:14 Rev counter function, fuel level (if fitted)

Blue LED speedometer / Km travelled and rev counter - diameter 60mm - chromed casing - with stand. For Honda Dax ST - Monkey and Skyteam - Singa - Skymax replicas... Meter function with original cable, KM/h or MPH, ratio 1:14 Rev counter function, fuel level (if fitted)

Pair of O-Rings front foot rest - folding - chrome - diameter 22mm for Honda Dax ST CT Monkey Cub and Skyteam Skymax Skymin PBR and other replicas. Supplied with pins and return springs.

Gas cable Kepspeed 700mm

Handlegrip Progrip Cross 794 orange fluo

Left Handlebar switch without clutch lever for Monkey replicas (Singa, chimp, Skymini, ...)

Pair of folding pilot footrests - grip for Dax-Monkey and replicas Made of solid aluminium, black anodised. Complete with return system: spring, axle and pin

N.G.U. contact key basic for duplicate for Honda Dax ST CT Monkey and reproductions

Takegawa racing throttle gas with side outlet 700mm straight gas cable. It comes with handle covers. Attention this set is not intended to be mounted on the original carburetor.

Gas cable Kepspeed 810mm

Footrest for backstep kit G-Craft 59mm