MOTORKIT graduated oil measuring bottle For quick and easy 2-stroke mixing.

Dellorto SHA 15 / 15 carburettor. The true and authentic SHA classic in a 15mm version. Suitable for most Peugeot 103, Puch maxi and MBK 51 mopeds, as well as Chinese pocket bikes. An adapted inlet pipe will be required in all cases. Main jet: 68 slider: Flat plastic Filter connection diameter: 59mm Pipe connection diameter: 19mm Tank: Plastic ...

Carburettor type Dellorto SHA 15 with manual choke and air / idle settings right side for intake manifold OD. 19mm . Supplied with air...

Dellorto carburator PHBG 19,5 mm female for cable choke / starter adjustable screws on right side

Dellorto PHBG 19 mm rigid carburetor - left adjustments The air and idle screws are located on the left side (particularly useful in the case of Honda Wallaroo) and it is designed to be mounted on an aluminum intake pipe with an outside diameter of 24 mm. It is sold with a manual pull-tab choke system, but this can be replaced in a jiffy by a <a...

Main Jet 64 for standard carburetor for Peugeot 103 1st models - MBK moped AV88. Thread diameter: 6.80mm, Height without head: 13mm, head height: 9.5mm - for 8mm wrench. Please check the dimensions before ordering.

Malossi inlet Manifold for mobylette  Motobécane  - MBK AV 88 - AV 7  Dellorto PHBG carburetor from 17 to 21. Outside diamter : 24 mm

Inlet gasket betweeen manifold en reed valve or engine for  MBK 51 Passion Magnum Rock

Fuel valve MBK - Motobecane AV (old model) M8 x 1.0

Main Jet 66 for standard carburetor for Peugeot 103 1st models - MBK moped AV88. Thread diameter: 6.80mm, Height without head: 13mm, head height: 9.5mm - for 8mm wrench. Please check the dimensions before ordering.

Contains: - Idle bushel - Idle screw - Idle spring - Starter spring - Main...

Intake pipe straight for carburator PHBG rigid from 17 to 21mm for MBK 51. Attention: this inlet pipe is only for specific assembly. If you have a std configuration, please found the other curved model.

Carburator SHA 14/12 Rigid mounting (interlocking of Ø18mm) without separate lubrication with the choke lever.

Carburator SHA 15mm

Carburator 17.5mm PHBG to fit on alloy manifold 24mm diameter

Malossi intake pipe for Motobécane MBK51 AV-10 Passion, Evasion, Magnum, Rock, Swing ... equipped with a Dellorto PHBG or Polini CP carburetor from 17 to 21mm. Outside diameter: 24mm

Main Jet 62 for standard carburetor for Peugeot 103 1st models - MBK moped AV88. Thread diameter: 6.80mm, Height without head: 13mm, head height: 9.5mm - for 8mm wrench. Please check the dimensions before ordering.

Gurtner Standard Carburetor Overhaul / Maintenance Set for MBK51 Magnum Passion Club Evasion and any model equipped with the AV-10 engine Contains: - Idle screw - Idle spring <span...

Carbu Type Dellorto SHA 16/16. With integrated air filter, easily accessible cable choke for intake manifold outer diameter: 19 mm. <div class="tlid-result-transliteration-container result-transliteration-container...

Carburator tank Malossi fast and clear for Dellorto SHA. supplied with gasket and plug

Carburator Polini CP 19 mm female, hand choke on carbu. dimensions : Inlet inner diameter : 24 mm  air filter diameter : 46 mm

Carburetor MBK51 - AV10 original type. Complete with the airbox.

Carburator Polini CP 17.5mm ♀

Carburetor type origin MBK88/89

Carburator 21 mm  Dellorto PHBG , main jet typ 5mm For aluminium manifold, outside diameter : 24 mm

Inlet pipe Malossi MBK 88 - 89 AV7 for SHA carburator. Carburator mounting diameter : 19mm

Doppler intake pipe - MBK Motobécane AV10 - FXC - flexible assembly Ultra short, it improves engine response. With fixing for mounting a silentbloc on the carburettor head (not supplied).

Manifold for MBK 51 - AV10  engine for Dellorto SHA15 carburetor

Carburetor Polini CP Evolution 19mm male (carburetor enter the manifold), ext. diam.  29mm , filter fixing 46mm or  61mm with Polini funnel included in the pack.

Carburator Polini CP 21mm ♀ Calibrations : Main Jet 72 Low Jet 42 Needle 14/22 Valve 24x30 Atomizer Bush d.2,7

Intake pipe for carburator 17 to 21mm for MBK 51

Fuel tank tap / cock for Motobecane - MBK51 screw-in with position indicator :ON - OFF - Reserve     MBK 51 V (50 cc) from 1978 to 2002   MBK 51 V (50 cc)   MBK MAGNUM RACING (50 cc)   MBK MAGNUM RACING XR (50 cc)

Inlet pipe for MBK 88 - 89 AV7 engine Ø15mm

Standard reedvalve for Motobécane - MBK 51 Magnum Evasion Rock Passion swing equipped with the AV10 engine. Supplied without gasket

Dellorto SHA 16/16 carburettor with manual choke and idle screw on the right side. With complete air filter For intake manifold with external diameter of 19mm. Recommended for Peugeot 103, MBK51, Puch Maxi and other 2-stroke mopeds.