Cylinder base gasket for Derbi Senda - GPR and Aprilia RS equipped with Euro 3 engines (Piaggio - D50BO. <div class="tlid-result-transliteration-container result-transliteration-container...

Cylinder kit Ø47mm ironcast for Derbi €3

Bidalot  needle bearing crankshaft / piston : 12 x 16 x 16 mm -  clearance  0-2

Cylinder kit Carenzi for Derbi Euro3 engine (complete piston + seal + cylinder) - Cast iron cylinder - Dual piston ring aluminum piston - Powerful and torquey this cylinder is intended for the driver looking for more performance for everyday use

Exhaust gasket for RF-WR Bidalot all models 

Airsal top engine kit - diameter 50mm in nikasylled aluminium for 50 Derbi Euro 3 (D5080) Senda - SM, DRD, Pro, SM, GPR - Gilera RCR and Aprilia RS from 2006 Vertex mono-segment piston.

R4R cylinder + separable head kit - cast iron - 70cc for any engine DERBI Euro 3 (D50BO) on Aprilia RS (from 2006) and Derbi GPR - Senda DRD Xtreme Pro R (from 2004).

Bidalot DERBI RF50 WR Naked Cylinder 50cc EURO 3. Only the separate cylinder.

Piston kit - 47mm diameter for 70cc R4R cylinder kit for gear box mopeds equipped with the Derbi Euro 2 or 3 engine. Supplied with piston rings, pin and circlips.

RF50WR Bidalot Derbi euro 3 50cc Racing Mounts only with a specific crankshaft Stroke 39.7mm, connecting rod 85mm * Distribution heights and compression rates suitable for use Racing (± 195 ° Exhaust, ± 133 ° in transfers, for a volumetric ratio from...

Cylinder kit Top Performances Ø50mm Derbi €3

Cylinder DERBI Senda, Pro, GPR, Aprilia RS - Euro 3,  from 2006, Standard, complete with piston kit and gasket set

Bidalot RF80WR 80cc top end engine - diameter 47.6 mm stroke 44.9mm for Derbi Euro 3. Thanks to its new design, the cooling of the cylinder is maximised via its water chamber surrounding all intake and exhaust poorts. Its one-piece cast cylinder head is self-centering in the cylinder. Its plug penetrates 2.4mm into the cylinder barrel. As with the cylinder, the cooling of the...

Top engine Racing kit 50cc Malossi MHR Team for Derbi Euro 3 engine   - Special alloy piston with a very high percentage of silicon to guarantee a very high resistance to heat and stability when temperatures change. - pewter outer coating ensuring a very low coefficient of...

Gasket set Ø47mm 70cc Derbi €3

Radiator Temperature sensor Derbi Senda - GPR euro 1 / 2 / 3 / 4 and Aprilia RS / RX after 2006 with 2 pins, M14 x 1.5. Fan controler Original parts

Piston ring Top Performance Ø50mm for AM6 engine?

Cylinder kit Airsal d 48mm for derbi euro 3

Derbi Italkit 80cc top engine in Nikasil treated aluminium, 50mm single ring piston. Provided for crankshaft with 40mm original stroke High compression cylinder head. Delivered with gaskets, O-Rings, reinforced needle cage and cylinder studs.

Polini Motori designed this Evolution exhaust for 50cc 2-stroke motorcycles. This specific model is  for motorcycles type ATV / enduro Aprilia, Beta, Derbi, Rieju and Yamaha.The main feature of the Evolution exhaust is the lower cut cones dilation to obtain the best performance, both on the engines d 50cc origin only on 80cc...

RF50WR Bidalot Derbi euro 3 50cc alldays model We advise a reinforced crankshaft (genuine stroke and conrod length)

Cylinder kit Derbi €3 40mm Naraku

Cylinder kit Polini 80cc Derbi euro 3 alu cast nickasil, 50mm piston, 18.3cv @12500 rpm

Gasket set for Motorkit Derbi Euro3 80cc - 50 mm

Cylinder head  standard Derbi Senda, DRD, GPR Euro 3 - Aprilia RS from 2006   

Temperature sensor for Derbi top engines euro 2 - 3 - 4 (D50B0). Indispensable for control and to avoid overheating. 14mm thread, 1.5mm pitch

Kit Airsal D39,9mm Derbi euro 3