Carburator Daytona Mikuni VM26 for mini 4 stroke - made in Japan Main jet # 190 (4 / 042-190) Idle jet # 22.5 (M28 / 1001-22.5) Needle # J8-5E75 Bushel # 1.5 (VM26 / 361-1.5)

Air Filter Oval Tapered Takegawa 42mm. Compatible for carburators : - PB 18-PD 22 - VM 22 - VM 24 - VM 26 It's have a entrance for a vent motor.

Takegawa High flow fuel cock for Honda Monkey Z50 - 50/100 Ape - CD50 - XR 50/100 with strainer (Filtration Device), Heavy Duty Gas Hose (5.5 x 200), 2 Clips. Mounting nut size: M14 pitch 1.0  

Air Filter Taper/Black Takegawa 32/35mm

Air Filter Oval Tapered Takegawa 49mm. Compatible for carburators : - PE 28 - PWK 28 It's have a entrance for a vent motor.

Air Filter Oval Tapered Takegawa 46mm. Compatible for carburators : - PE 20 - PE 22 - PE 24 It's have a entrance for a vent motor.

Keihin PE28 carburettor reviewed by Takegawa. Main jet of 128 and idle 52 mounted + supplied with another main 110 and idle of 35

Keihin PC 20 carburetor for Honda Ape - NSF - XR Motard 100cc. Developed by Kitaco, it comes with a gas cable, a main jet of 95 and idle 35. It can be mounted with the original intake manifold but requires an air filter with an inside diameter <span...

Air filter cover Takegawa. Fit directly to air filter Takegawa Oval tapered and round taper.

Intake manifold for vertical Honda engines for large ports cylinder heads. Suitable for carburetors from 18 to 22 mm and especially to Keihin PC20. Delivered with insulator and gaskets. <div...

Intake manifold for vertical Honda engines for cylinder heads with narrower ducts (on electronic ignition engines) . Suitable for carburetors from 18 to 22 mm and especially to Keihin PC20. Delivered with insulator and gaskets.

Takegawa inlet pipe set for carburator PE24, TM24 on vertical Honda Engine. Complete with inlet rubber en screw set.

Kitaco intake manifold set for Mikuni VM26 carburetor for hight tuned engine on Honda Ape - XR - XL 50 and 100 cc.