Top gasket set Takegawa B- SET for S+R 152 cc (Lifan engine)

Top gasket set Takegawa for CSM engine, 148 -158  cc, 59 mm piston  

Takegawa oil pump high flow for all engine with oil pump like Honda Nice This high flow pump can be installed on all recent factory Takegawa engine (like 4sm, csm, or with crankcase TNC) This will be also compatible with many chinese engine. Like all YX, Zongshen, Lifan (more of 125cc), Zongshen, and also Daytona engine. Japan quality, parts Takegawa.

Takegawa cilinder base gasket for 148cc CSM engine

Takegawa O-Ring seal 15mm x 1 for Thermostat Cap on 4SMS Hydraulic Clutch Housing with Cable Control. Price for 1 piece <div class="tlid-result-transliteration-container result-transliteration-container...

set of 2 carter gaskets Takegawa TNC (crankshaft case + clutch)

TNC crankcase gasket - for 4SM Takegawa engine

Takegawa gear change oil seal 17x29 X 5 mm for 4SMS 4 and 5 speed  engine with dry or hydraulic clutch. For Super Street and Super Touring gear boxes

Gasket set with oil seals and o-rings for Takegawa 138cc engine Complete for lower and upper Factory type 4SM engine

Takegawa 58 mm head gasket for 138 cc - 4SM engine

Intake valve Takegawa superhead+r CSM   Lenght: 71.82mm Exhaust valve:30mm Stem 4.5mm

Head gasket for Takegawa CSM, diameter 59 mm

Kick starter sprocket 25 th Takegawa for Factory engine 4SM

set of 2 gaskets for Takegawa 148cc 4SM 59 mm ( cylinder base + head)

Piston kit Takegawa 59mm for Takegawa CSM 148cc engine with the SuperHead+R 2valve

TAKEGAWA 17 teeth oil pump gear for TNC - 4SM - CSM crank case. Inside diameter 17 mm, thickness 7.2 mm

gasket set for  top and low engine + oil seals + O-rings Takegawa for  CSM

Cylinder base gasket for Takegawa Factory CSM engine

Takegawa top Gasket set, 57 - 58 mm for 138 cc and 4SM engine.    

Piston kit Takegawa 57mm 138cc 4V 4SM, complete, axle 13mm

Takegawa piston kit, diameter 59 mm for  Superhead + R 148cc 2 valves 4SM.

Pair of Takegawa replacement crankcases for Factory CSM 148/158cc engine. Comes with gearbox bearings, cylinder studs, gearbox shaft and gear selector oil seals.

Takegawa clutch housing. Spare part for Factory primary engine.

Pair of crankcases Takegawa TNC. 4SM for 138cc factory engines These cases have been developed to allow maximum strength ...

Takegawa Clutch Cable Guide Bracket for Factory Motor

Set of 4 dowel pins between cylinder - head and between cylinder - engine: 2 X 8x12 mm - 2 X 8x14 mm for Takegawa 4SM

crankshaft Takegawa 54mm stroke for Scut 138cc kit

Pair of crankcases Takegawa TNC. These cases have been developed to allow maximum strength when...

Pair of crankcases Takegawa TNC. These cases have been developed to allow maximum strength when...