Takegawa speed controller for Honda Monkey 125 version JB02

Takegawa Honda Monkey 125 speed controller version JB02

This is a speed sensor kit that detects the speed of rotation of the rear wheel and drives the normal speedometer.
Even if you change the sprocket or install another 5-speed gearbox, it will still be possible to display the speed on the normal speedometer.
What's more, even if the tyre size is changed as a result of vehicle customisation, the speed displayed can be adjusted in 16 steps from around 84% to around 114% of the original speed by setting the rotary switch on the normal speedo drive unit. This can also be corrected.
(If the normal tyre outside diameter is 527 mm, this corresponds to tyre outside diameters of approximately 443 mm to approximately 601 mm).

As an installation cable is included, it can be installed with the coupler without cutting the original harness.

This product is intended for use with the original brake bracket.
The speed sensor bracket included is machined from aluminium and has an anodised surface.

Compatible with normal swingarm vehicles and vehicles fitted with Takegawa swingarms.