Carburator Daytona Mikuni VM26 for mini 4 stroke - made in Japan Main jet # 190 (4 / 042-190) Idle jet # 22.5 (M28 / 1001-22.5) Needle # J8-5E75 Bushel # 1.5 (VM26 / 361-1.5)

Waterproof high pressure fuel line running from the pump to the injector for "Dax" Skyteam and Zhenhua City 125 and 50cc Euro 4 with injection. Complete with 2 crimped connectors, length...

Carburettor type PE with adjustments for 4 stroke engines. In 24 and 26 mm : delivered with round bushel, flexible assembly and choke by cable. In 20 and 28 mm with a manual choke. <span...

Standard intake manifold for "Dax" Skyteam Skymax TNT City Zhenua fitted with the 125cc Euro 4 engine with Rojo injection. Adaptable in "unrestricting" on 50cc models. Supplied with O-Ring seal. <div...

Intake manifold for "Dax" Skyteam Skymax TNT City Zhenua equipped with 50cc Euro 4 injection engine

20mm manifold for Dax

Waterproof high pressure fuel line running from the pump to the injector for "Dax" Skyteam and Zhenhua City 125 and 50cc Euro 4 - 5 with injection. <div class="result-shield-container...

Bluetooth box for Skyteam and Zhenhua City 125 and 50cc Euro 5 with injection. This box allows you to access the injection settings of the Skyteam and Zhenhua Euro 5 engines via the free Android ROJO motor app which you can download here. The required access password is 333333 or 666666 <span...

Original (restricted) intake pipe for "Dax" Skyteam Zhenhua TNT City 50cc equipped with Euro 4 and 5 injection engine.

Rojo fuel pump for Skyteam and Zhenhua City 125 and 50cc Euro 4 with injection Reinforced version with aluminum body.

ROJO ECU -CDI racing box "Dax" Skyteam Zhenhua 50cc-70cc with Euro 4 engine with speed limit raised to 13,000 rpm. The programming of the performance level is done via the Bluetooth box or via a PC. Keep in mind that your engine warranty will...

ECU -CDI ROJO racing "Dax" Skyteam Zhenhua 125cc with Euro 5 engine with rev limit raised to 13.000 rpm. The unboxing is automatic and direct. You can also choose another level of performance via the Rojo application €5 and the Bluetooth connector €5 (available here as an...

Bluetooth box for zhenhua City 125 and 50cc Euro 4 with injection. This box allows you to access the Zhenhua Euro 4 engine injection settings via the free Android ROJO motor application that you will find here for download. Password 333333 or 666666 By purchasing this product you declare yourself competent to...

Carburettor with integrated fuel tap for Honda Dax Monkey Gorilla - Fixing screw distance: 42mm - choke lever on the right - On-off-reserve fuel tap on the right PZ17 with a real section of 14mm -Main jet 72 type 4mm -Idle jet 36

Complete Daytona intake manifold for Keihin PE28 carburetor for Anima engine. Supplied with rubber sleeve, gasket, clamp and screws Version without vacuum for automatic valve.

Shen Wei 26mm carburettor for Dax - Monkey and replicas. For 36mm air filter. The bore is oval for the PZ type carburettor, so the dimensions are 20mm wide and 26mm high. 2 M6 mounting screws spaced 48mm apart Total length of 68mm

ROJO ECU -CDI racing box "Dax" Skyteam Zhenhua 125cc with Euro 4 engine with speed limit raised to 13,000 rpm. The programming of the performance level is done via the Bluetooth box The selected curve is active as long as the smartphone is...

20mm polished manifold for Dax

Conversion of Rojo 50cc injection for Skyteam and Zhenhua engines to CDI ignition and carburetor VM16 included This kit which plugs into the original wiring harness, you will have to fit a carburetor of your choice. includes: 1 x CDI D / C 4 pins variable and adjustable advance 1 x Wiring 1 x CDI specific high voltage coil 1 x Spark plug...

Shen Wei 24mm Dax / Monkey carburettor, 36mm intake filter. The bore is oval for the PZ type carburettor, so the dimensions are 20mm wide and 24mm high. Attached by 2 M6 mounting screws spaced 48mm apart (not supplied). Total length 68 mm

Conversion of Rojo 50 / 125cc injection to CDI ignition and carburetor (not included) This kit which plugs into the original wiring harness, you will have to fit a carburetor of your choice. includes: 1 x CDI D / C 4 pins variable and adjustable advance 1 x Wiring 1 x CDI specific high voltage coil Everything is pre-wired with the corresponding...

Carburetor Daytona PE28, throttle 3.0, Needle JFN, mainjet 125 slow jet 40

Mikuni VM 26mm carburettor 4Stroke, pre-set by KITACO. It is equipped with a round treated bushel with a # 1.5 cut, a main jet of 150, idle 15 and a 4J13-2 needle. ...

Carburetor Keihin PWK 33 Daytona - Main jet  : 165 - Idle jet : 52 - Needle 48-CGL -  Throttle slide 6.0 For filter Ø58mm

Nibbi PZ14mm carburettor without fuel tap for 50cc 4 stroke mini. Air filter inlet 30mm, section 12.5mm, mounting flange 38mm 2 x M6. Main jet: 55 Gurtner type Idle jet 35 type keihin PC

Rojo 50/125cc Euro 5 fuel injection to CDI ignition and carburettor conversion kit ( Carbu not included) for Skyteam Bullet Heritage "dax" This kit connects to the original wiring harness, you will have to fit a carburettor of your choice. Comes with a silicone rubber case for the cdi to prevent vibration. Includes : 1 x CDI type D/C 4 pin variable and...

12-way adapter for 26mm intake manifold allows you to choose the best carburetor position on your Honda or replica mini 4-stroke

flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua

Orignal fuel injection system for "Dax" City - Skymax - Zenhua - 125cc Skyteam with Euro 4 engine Version with the new aluminum fuel pump. Pay attention to the outlet pipe which is specific

Adjustable inlet pipe for VM26 (30°)

Shen Wei 18mm Carburetor Dax / Monkey 32mm filter inlet. 2 x M6 fixing screws 48mm apart Overall length of 64.5mm 

Trail-Bike short intake pipe - left side for 20mm carburetors 48mm center distance. Supplied with insulator, gaskets, screws and tightening...

Mad-Munk intake pipe type origin for Dax. Suitable for mounting the original carburetor (16mm) with the original air filter housing. Has no flange and / or anti-pollution system. Supplied...

Carburator sheng wey PZ16mm Mounting 2 M6 screws 47mm apart, 19mm outlet 3mm off centre Main nozzle 68 keihin type 4mm 32 idle jet.

Complete Daytona intake manifold for Keihin PWK 33 carburetor for Anima engine. Supplied with rubber sleeve, gasket, clamp and screws

Top cap gasket for Mikuni VM 24 carburator

PZE18 with an oval inner section of 16mm -Screw spacing: 48mm <span class="JLqJ4b...

flexible intake manifold set for Mikuni VM26 and Keihin PWK 26/28 mm carburettors. Inner diameter of the rubber sleeve: 30 mm. For Honda Dax ST50 CT70 ST70 CT70 Cub (6 and 12 Volt) Monkey CRF ZB Chaly Gorila and Skyteam Singa TNT City Zenhua

Adjustable positioning intake pipe for Keihin PWK / Mikuni VM 26 and 28 mm carburetors. For Honda Dax ST CT Monkey Cub and Skyteam. Inner diameter of the rubber sleeve 33mm,...

Rubber intake pipe for Keihin PWK and Mikuni VM carburetors on Honda Dax ST50 ST70 CT50 CT70 Monkey Cub CRF and Skyteam and other replicas. Center distance 46.5mm - 8mm offset Fits BS0272 manifold

Set of injection body and ECU / CDI ROJO box + wiring for "Dax" Skyteam and Zhenhua City 50cc Euro 4 with injection. Supplied with flanged manifold and original 30cc/min injector. Not suitable for Euro 5 models.

Carburetor Nibbi PWK 24 racing 24YJ 4 stroke with adjustable power jet jet type PE/PWK of 112 idle jet : 32 power jet : 28 diameter of the filter to foresee 50mm diameter of the sleeve to be foreseen 35mm