A set of 4 sets of 6 rollers of 16x13mm. They are of different colors to be able to recognize them quickly. There are 1 sets of 4gr, one of 4.5gr, one of 5.0gr and one of 5.5gr. You can of course mix by 3 these different weights which gives these possibilities: 6 x 4gr = 24gr 3 x 4gr + 3 x 4.5gr = 25.5gr 6 x 4.5gr or 3 x 4gr + 3 x 5 gr = 27gr 3 x 4.5gr...

variator roll / load  set 15 x 12 for standard Minarelli and CPI, generic, Neco, Keeway  variator, 22 different weight

Variator rol set 4x 6 rolls 15x12mm 4g / 4.5g / 5g / 5.5g

 POLINI clutch springs for standard clutch for Minarelli engines : 4 different colors, 4 different hardness See below.

Nut 10 x 1 mm to fit clutch housing on all scooter with Minarelli  engine and Chinese 2 stroke. Thickness 8 mm, for 17 mm wrench Also for Zundapp flywheel

Adjustable racing clutch Nitro, Aerox, Booster, Bws, Ovetto, stunt, Slider and Peugeot, Honda and Piaggio scooter  - 107 mm diameter - Supplied with two different springs set and a torsion controller. 3 jaws, diameter 107 mm. Fine tune the moment when your clutch hangs.

Variator Motorkit racing for a better progresivity and acceleration. Fits all scooter with Minarelli engine.

Variator rolls set for Piaggio and MHR TEAM 19 x 15.5 mm

Half Pulley / vario fan Nitro, Aerox, Booster, Bw's, Ovetto, Neos, Jog, Mach G, Sr - Standard -  and all Minarelli engine

Standard clutch plate for Nitro, Aerox, Booster, Bws, Ovetto, stunt, Slider, Speedfight, Kisbee, Vivacity, Ludix, Fox, Wallaroo, SFX, Bali, X8R, Typhoon, Zip, Runner... and on most 50cc scooters with Minarelli, Peugeot, Honda, Sym, Kymco engines - diameter 107mm - pad thickness: 18mm - thickness with support: 28mm

Clutch springs set for all 2 stroke 50cc scooter with Minarelli engine. 3 different hardness: Green 1.8mm Blue 2.0mm Red 2.3mm

Clutch bell Nitro, Aerox, Booster, Bws, Ovetto, stunt, Jog, Neos, Aprilia SR - standard, 107 mm diameter

Krank shaft nut M10 x 1.25 for 14 mm socket wrench

Clutch nut Nitro, booster, Aerox, bw's, Ovetto, Stunt, Neos, Slider, Cpi, Keeway, Aprilia SR - 10 x 1 mm

Stars for half pulley for scooter Minarelli 13mm    

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  White, + 30% Ø53,1x110mm Øwire 3,8mm.  

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  Red, + 40%

Rear compression spring Malossi Nitro, Aerox, Booster, BW, Slider,Neos, Jog, CPI, Keeway, Generic, Grido.  Yellow, + 35% Ø53,5x115mm Øwire 3,7mm

17 x 25 x 18mm rear variator needle cage for motor scooters: Minarelli 2S 50 cc Piaggio 2S 50 cc Kymco 2S 50 cc Peugeot 2S in 4S 50 cc Sym 2S in 4S 50 cc

Variator Polini Hi-Speed for  Booster / BW'S / Nitro /Aerox / Jog / Stunt / Slider

Torsion controller Maloss for Nitro, Aerox, Booster, Bws, Stunt, Ovetto, Slider, Neos, Jog, Mach G, CPi, Keeway, Generic, Neco

Rollers for variator Polini 16x13 ( 3.5 - 4 - 4.5 - 5g )

Clutch Polini For Race 3 Ø107mm Minarelli?

Flat nut - 29 x 1 - maintaining clutch to rear variator for all 50 cc scooter with Minarelli engine

Set of 3 types of springs of different hardness for 3G Polni clutch. - Green 1.8mm - torque 4.000-5.500 TRM - Yellow 1.9mm - torque 5.500-6.500 TRM - Blue 2.0mm - torque 6.500 - 7.500 TRM Spare parts for the following Polini clutches: 249.046- 249.047- 249.048- 249.049- 249.050- 249.051- 249.061- 249.062

Rollers for variator Polini 16x13 ( 4.5 - 5 - 5.5 - 6g )

Rollers for variator Polini 16x13 ( 2.5 - 3 - 3.5 - 4g )

Hi Speed variator Pack Drive Polini for all scooter with Minarelli engine . with 1belt,  different roll set and 2 pression springs

washers set (30pcs) for Minarelli variator. To ajust the height of the belt. 13 x 18.5 mm 13x18,5x0,6mm 13x18,5x0,8mm 13x18,5x0,35mm 13x18,5x1,0mm

Clutch bell Polini Booster, Bws, Nitro, Jog, Stunt ,  Mach G, Ovetto,  Aprilia SR, Benelli,  Minarelli, 107mm, standard

Fixed pulley / half pulley for racing variator - in Teflon treated aluminium - inner diameter: 13mm. for all 50cc - 2 stroke scooters equipped with the Minarelli vertical or horizontal engine: Aprilia Amico 2t (1992-1998) Aprilia Amico 50 AIR 2T '96-'98 Aprilia Amico GL 50 AIR 2T '94-'95 Aprilia Amico LX-...

Variator restrictor for Minarelli

Clutch Top Performance Nitro, Aerox, Booster, Bws, Ovetto, stunt, Jog, Neos, Aprilia SR, standard, 107 mm diameter  

Clutch springs set for all 2 stroke 50cc scooter with Minarelli engine. 3 different hardness: Green 1.8mm Blue 2.0mm Red 2.3mm

Variator tabs Nitro - Booster - Aerox - Bw - Stunt - Ovetto - Jog for original angle disk

Set of 3 blue springs for Malossi Fly Clutch and Delta clutch jaws. Wire diameter: 2.1mm (very high hardness).

Racing Cool clutch Bell  -107 mm diameter - forced cooling for Nitro Aerox Booster Bw's Ovetto Neos Mach G Aprilia SR and any 50cc scooter with 2 stroke Minarelli engine

Rollers caps replacement kit  Polini diam. 15 x 12 (for original vario)  12  pc for  6 rolls  + 3 variator plate guides

Spring clutch for Polini 2G

Half pulley Polini Air Speed Evolution 3 for all Minarelli scooter engine. Ceramic tecnology.

 3 Malossi Vario  tabs for Multivar variateur. Fits also MHR 2000, Polini Speedcontrol, Bidalot and Motorkit varios

3 Spring set MHR for Fly/Delta clutch

Variator Conic washer Nitro, Aerox, Booster, BW, Ovetto, Stunt, Neos, Slider, Jog, Mach G, aprilia SR and all Minarelli motors